ETHERCARD PLUS10T Network Card Settings and Configuration
WESTERN DIGITAL CORPORATION
ETHERCARD PLUS10T
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Data Bus | 8-bit ISA |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port |
Boot ROM | Available |
CONNECTIONS | |||
Function | Label | Function | Label |
Unshielded twisted pair port | CN1 | AUI transceiver via DB-15 port | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Clear configuration disabled | W1 | Open |
Clear configuration enabled | W1 | Closed | |
| » | Automatic polarity correction enabled | W20 | Pins 1 & 2 closed |
Automatic polarity correction disabled | W20 | Pins 2 & 3 closed | |
| » | Link integrity test enabled | W21 | Open |
Link integrity test disabled | W21 | Closed | |
ROM SIZE SELECTION | ||
Size | W9 | |
| » | 16KB | Pins 1 & 2, 4 & 5 closed |
32KB | Pins 2 & 3, 4 & 5 closed | |
64KB | Pins 2& 3, 5 & 6 closed | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Polarity is good on 10Base-T |
LED1 | Green | Off | Polarity is broken on 10Base-T |
LED2 | Green | On | 10Base-T Link Integrity mode is selected |
LED2 | Green | Off | 10Base-T Link integrity mode is not selected |
LED3 | Yellow | On | Data is being transmitted |
LED3 | Yellow | Off | Data is not being transmitted |
LED4 | Green | On | Data is being received |
LED4 | Green | Off | Data is not being received |
My Books
