AE-220ST Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus
Wiring Type	RG58A/U 50ohm coaxial
Boot ROM	Available

CABLE TYPE
Type	JP1A-H
RG58A/U 50ohm coaxial	Pins 1 & 2 closed
DIX transceiver via DB-15 port	Pins 2 & 3 closed

SEGMENT LENGTH
Length	JP2
185 meters	Open
300 meters	Closed

TERMINATOR
Setting		JP3
»	Unterminated	Open
	Coaxial linear-bus terminated by card	Closed

WAIT STATE CONFIGURATION
Bus Speed		JP4
	6MHz - 8MHz	Open
»	> 8MHz	Closed

ROM SIZE
Size	JP5
16KB	Pins 2 & 3 closed
32KB	Pins 1 & 2 closed

INTERRUPT SETTINGS
IRQ	JP6A	JP6B	JP6C	JP6D	JP6E	JP6F	JP6G
2/9	Closed	Open	Open	Open	Open	Open	Open
3	Open	Closed	Open	Open	Open	Open	Open
4	Open	Open	Closed	Open	Open	Open	Open
5	Open	Open	Open	Closed	Open	Open	Open
10	Open	Open	Open	Open	Closed	Open	Open
11	Open	Open	Open	Open	Open	Closed	Open
12	Open	Open	Open	Open	Open	Open	Closed

BASE I/O ADDRESS
Address		JP6H	JP6I	JP6J	JP6K
»	300h	Open	Open	Open	Closed
	320h	Open	Open	Closed	Open
	340h	Open	Closed	Open	Open
	360h	Closed	Open	Open	Open

BOOT ROM ADDRESS
Address		JP6L	JP6M	JP6N	JP6O	JP6P
	C0000h	Closed	Closed	Closed	Closed	Closed
	C4000h	Closed	Closed	Closed	Closed	Open
»	C8000h	Closed	Closed	Closed	Open	Closed
	CC000h	Closed	Closed	Closed	Open	Open
	D0000h	Closed	Closed	Open	Closed	Closed
	D4000h	Closed	Closed	Open	Closed	Open
	D8000h	Closed	Closed	Open	Open	Closed
	DC000h	Closed	Closed	Open	Open	Open
	E0000h	Closed	Open	Closed	Closed	Closed

NETWORK VERSION
Version		JP6
	Ethernet Version 1 (uses DIX port only)	Open
»	Ethernet Version 2 (can use all ports)	Closed