YOUNG MICRO SYSTEMS, INC.
MB-6000
Processor | Pentium Pro |
Processor Speed | 133/150/166/180/200MHz |
Chip Set | Intel |
Video Chip Set | None |
Maximum Onboard Memory | 512MB (EDO supported) |
Maximum Video Memory | None |
Cache | 256/512KB (located on Pentium Pro CPU) |
BIOS | AMI |
Dimensions | 305mm x 244mm |
I/O Options | 32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), Ultra Wide SCSI interface, Fast SCSI interface, parallel port, PS/2 mouse port, serial ports (2), IR connector, ATX power connector |
NPU Options | None |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
ATX power connector | ATX | Soft on power | JP1 pins 1 & 2 |
Serial port 2 | CN1 | Turbo LED | JP1 pins 3 & 4 |
Parallel port | CN2 | Power LED & keylock | JP1 pins 5 - 9 |
PS/2 mouse port | CN3 | IDE interface LED | JP1 pins 10 - 13 |
Serial port 1 | CN4 | Speaker | JP1 pins 14 - 17 |
Ultra Wide SCSI interface | CN5 | Reset switch | JP1 pins 18 & 19 |
Fast SCSI interface | CN6 | Green PC connector | JP1 pins 20 & 21 |
IDE interface 1 | CN7 | IR connector | JP1 pins 22 - 26 |
IDE interface 2 | CN8 | 32-bit PCI slots | PC1 – PC4 |
Floppy drive interface | CN9 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | SCSI high byte termination select auto | JS8 | Pins 1 & 2 closed |
SCSI high byte termination select always | JS8 | Pins 2 & 3 closed | |
» | RAID support select normal | JS9 | Pins 1 & 2 closed |
RAID support select ARO-1130 RAID card installed | JS9 | Pins 2 & 3 closed | |
» | SCSI data bus width select Fast 8-bit | JS10 | Pins 1 & 2 closed |
SCSI data bus width select Fast and Wide 16-bit | JS10 | Pins 2 & 3 closed | |
Flash BIOS voltage select 12v | FLASH | Pins 1 & 2 closed | |
Flash BIOS voltage select 5v | FLASH | Pins 2 & 3 closed | |
» | CMOS memory normal operation | CMOS | Pins 1 & 2 closed |
CMOS memory clear | CMOS | Pins 2 & 3 closed | |
» | Monitor type select color | MONO | Pins 1 & 2 closed |
Monitor type select monochrome | MONO | Pins 2 & 3 closed | |
» | Password normal operation | PSWD | Pins 1 & 2 closed |
Password clear | PSWD | Pins 2 & 3 closed | |
DRAM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (2) 1M x 36 | None |
16MB | (2) 2M x 36 | None |
16MB | (2) 1M x 36 | (2) 1M x 36 |
32MB | (2) 4M x 36 | None |
32MB | (2) 2M x 36 | (2) 2M x 36 |
64MB | (2) 8M x 36 | None |
64MB | (2) 4M x 36 | (2) 4M x 36 |
128MB | (2) 8M x 36 | (2) 8M x 36 |
128MB | (2) 16M x 36 | None |
256MB | (2) 16M x 36 | (2) 16M x 36 |
256MB | (2) 32M x 36 | None |
512MB | (2) 32M x 36 | (2) 32M x 36 |
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. | ||
CACHE CONFIGURATION |
Note: 256KB/512KB cache is located on the Pentium Pro CPU. |
CPU SPEED SELECTION | ||||||
CPU speed | Clock speed | Multiplier | JS4 | JS5 | JS6 | JS7 |
133MHz | 66MHz | 2x | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 |
150MHz | 60MHz | 2.5x | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
166MHz | 66MHz | 2.5x | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 |
180MHz | 60MHz | 3x | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
200MHz | 66MHz | 3x | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 |
Note: Pins designated should be in the closed position. | ||||||
CPU SPEED SELECTION (CON’T) | ||||||
CPU speed | Clock speed | Multiplier | JSS1 | JSS2 | JSS3 | JSS4 |
133MHz | 66MHz | 2x | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
150MHz | 60MHz | 2.5x | 1 & 2 | 1 & 2 | 1 & 2 | 2 & 3 |
166MHz | 66MHz | 2.5x | 1 & 2 | 1 & 2 | 1 & 2 | 2 & 3 |
180MHz | 60MHz | 3x | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 |
200MHz | 66MHz | 3x | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 |
Note: Pins designated should be in the closed position. | ||||||