T160F Hard Disk/Floppy Controller Settings and Configuration
TRANTOR SYSTEMS, LTD.
T160F
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drives supported: | Up to seven SCSI devices |
CONNECTIONS | |
Function | Location |
25-pin SCSI connector-external | CN1 |
50-pin SCSI connector-internal | J3 |
4-pin connector - drive active LED | J4 |
34-pin floppy connector | J7 |
34-pin floppy connector | J8 |
INTERRUPT REQUEST - JP1 | ||||||||
IRQ | Jumper 1 | Jumper 2 | Jumper 3 | Jumper 4 | Jumper 5 | Jumper 6 | Jumper 7 | |
| » | none | open | open | open | open | open | open | open |
| » | IRQ3 | closed | open | open | open | open | open | open |
| » | IRQ5 | open | closed | open | open | open | open | open |
| » | IRQ7 | open | open | closed | open | open | open | open |
| » | IRQ10 | open | open | open | closed | open | open | open |
| IRQ12 | open | open | open | open | closed | open | open | |
IRQ14 | open | open | open | open | open | close | open | |
IRQ15 | open | open | open | open | open | open | closed | |
I/O PORT ADDRESS - SW1 | ||||
Address | Switch 1 | Switch 2 | Switch 3 | |
| » | 360h | off | off | off |
230h | on | on | on | |
240h | on | on | off | |
250h | on | off | on | |
260h | on | off | off | |
330h | off | on | on | |
340h | off | on | off | |
350h | off | off | on | |
BIOS ADDRESS - SW1 | ||||
Address | Switch 4 | Switch 5 | Switch 6 | |
| » | Disabled | off | off | off |
| » | C8000h | off | off | on |
| » | CA000h | off | on | off |
| » | CE000h | off | on | on |
| » | D0000h | on | off | off |
| » | D4000h | on | off | on |
| » | D8000h | on | on | off |
| » | DC000h | on | on | on |
MISCELLANEOUS TECHNICAL NOTES |
SW1 switches 7 and 8 are factory configured - do not alter. JP3 is factory configured - do not alter. |
My Books
