PT-606 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
15-pin game port - internal	CN1
40-pin IDE(AT) interface connector	CN2
34-pin control cable connector - floppy drive	CN3
9-pin serial port (COM1/3) - external	CN4
9-pin serial port (COM2/4) - internal	CN5
25-pin parallel port (LPT2/3) - external	CN6
4-pin connector - drive active LED	J2

PARALLEL PORT CONFIGURATION
LPT		JP1	JP8
»	LPT2	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3	pins 1 & 2 closed	pins 2 & 3 closed
	LPT2 Disabled	pins 2 & 3 closed	pins 1 & 2 closed
	LPT3 Disabled	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT CONFIGURATION
Port 1 (CN4)		Port 2 (CN5)	JP2	JP3	JP4	JP5
»	COM1	COM2	pins 1 & 2	pins 1 & 2	pins 1 & 2	pins 1 & 2
	COM1	COM4	pins 1 & 2	pins 2 & 3	pins 1 & 2	pins 1 & 2
	COM3	COM2	pins 1 & 2	pins 1 & 2	pins 2 & 3	pins 1 & 2
	COM3	COM4	pins 1 & 2	pins 2 & 3	pins 2 & 3	pins 1 & 2
	COM1	Disabled	pins 2 & 3	pins 1 & 2	pins 1 & 2	pins 1 & 2
	COM1	Disabled	pins 2 & 3	pins 2 & 3	pins 1 & 2	pins 1 & 2
	COM3	Disabled	pins 2 & 3	pins 1 & 2	pins 2 & 3	pins 1 & 2
	COM3	Disabled	pins 2 & 3	pins 2 & 3	pins 2 & 3	pins 1 & 2
	Disabled	COM2	pins 1 & 2	pins 1 & 2	pins 1 & 2	pins 2 & 3
	Disabled	COM4	pins 1 & 2	pins 2 & 3	pins 1 & 2	pins 2 & 3
	Disabled	COM2	pins 1 & 2	pins 1 & 2	pins 2 & 3	pins 2 & 3
	Disabled	COM4	pins 1 & 2	pins 2 & 3	pins 2 & 3	pins 2 & 3
	Disabled	Disabled	pins 2 & 3	pins 1 & 2	pins 1 & 2	pins 2 & 3
	Disabled	Disabled	pins 2 & 3	pins 2 & 3	pins 1 & 2	pins 2 & 3
	Disabled	Disabled	pins 2 & 3	pins 1 & 2	pins 2 & 3	pins 2 & 3
	Disabled	Disabled	pins 2 & 3	pins 2 & 3	pins 2 & 3	pins 2 & 3
Note: All pins designated should be in the closed position.

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive enabled	JP6	pins 1 & 2 closed
	Hard drive disabled	JP6	pins 2 & 3 closed
»	Game port enabled	JP7	pins 1 & 2 closed
	Game port disabled	JP7	pins 2 & 3 closed
»	Floppy drive interface enabled	JP9	pins 1 & 2 closed
	Floppy drive interface disabled	JP9	pins 2 & 3 closed
»	Hard drive controller installation exists	JP10	pins 1 & 2 closed
	Hard drive controller installation does not exist	JP10	pins 2 & 3 closed