V-LINK/2C (VP-892CPM) Sound card Settings and Configuration

ELETECH ENTERPRISE CO., LTD.

V-LINK/2C (VP-892CPM)

Card Type
Voice card
Chip Set
Unidentified
Maximum Onboard Memory
N/A
I/O Options
Line1, line 2, microphone in, tape in, speaker out
Hard Drives supported
None
Floppy drives supported
None
Data Bus
16-bit ISA
Card Size
Three-quarter-length, full-height

CONNECTIONS
Function
Label
Function
Label
Line 2
CN1
Speaker out
CN5
Line 1
CN2
Unidentified
SENS
Microphone in
CN3
Volume
VOL
Tape in
CN4

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
1/2 make/break ratio for pulse dialing on line 1 enabled
W5
Closed

2/3 make/break ratio for pulse dialing on line 1 enabled
W5
Open
»
1/2 make/break ratio for pulse dialing on line 2 enabled
W6
Closed

2/3 make/break ratio for pulse dialing on line 2 enabled
W6
Open
»
Sampling rate for both lines is 32 Kbps
W11
Closed

Sampling rate for both lines is 44.5 Kbps
W11
Open
»
Factory configured - do not alter
W19
Unidentified
»
Factory configured - do not alter
W20
Unidentified
»
Factory configured - do not alter
W21
Unidentified
»
Factory configured - do not alter
W22
Unidentified
»
Factory configured - do not alter
W23
Unidentified
»
Factory configured - do not alter
W24
Unidentified
»
Factory configured - do not alter
W25
Unidentified

MICROPHONE /TAPE INPUT SELECTION
Setting
W1
W2
»
Line 1
Closed
Open

Line 2
Open
Closed

SPEAKER OUTPUT SELECTION
Setting
W3
W4
»
Line 1
Closed
Open

Line 2
Open
Closed
Note:This option is usually set according to microphone/tape input selection since the speaker is usually used to monitor the recording of messages from a tape player.

LINE 1 BASE I/O ADDRESS AND INTERRUPT SELECTION
IRQ
I/O Address
W7
W8
2
238h
Closed
Closed
3
270h
Open
Closed
5
230h
Closed
Open
7
278h
Open
Open

LINE 2 BASE I/O ADDRESS AND INTERRUPT SELECTION
IRQ
I/O Address
W9
W10
10
310h
Closed
Closed
11
318h
Closed
Open
12
320h
Open
Closed
15
328h
Open
Open

NSP TIMING SELECTION
Setting
W12
W13
W14
W15
W16
W17
W18
1.56
Off
On
Off
Off
Off
Off
Off
1.87
Off
Off
On
Off
Off
Off
Off
2.18
Off
Off
Off
On
Off
Off
Off
2.50
Off
Off
Off
Off
On
Off
Off
2.81
Off
Off
Off
Off
Off
On
Off
3.12
Off
Off
Off
Off
Off
Off
On
1.81
On
On
Off
Off
Off
Off
Off
2.19
On
Off
On
Off
Off
Off
Off
2.56
On
Off
Off
On
Off
Off
Off
2.94
On
Off
Off
Off
On
Off
Off
3.31
On
Off
Off
Off
Off
On
Off
3.69
On
Off
Off
Off
Off
Off
On

VR1, VR2 SELECTION
Label
Status
Condition
VR1
Turn clockwise
Amplify microphone input signal
VR2
Turn clockwise
Increase speaker output volume
Note:Location of VR1 and VR2 is unidentified.

DIAGNOSTIC LED(S)
LED
Status
Condition
L1
On
Hookswitch of line 1 is off-hook
L1
Off
Hookswitch of line 1 is on-hook
L2
On
Hookswitch of line 2 is off-hook
L2
Off
Hookswitch of line 2 is on-hook

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

V-LINK/2C (VP-892CPM) Sound card Settings and Configuration

Search

My Books

Discover

Card Type	Voice card
Chip Set	Unidentified
Maximum Onboard Memory	N/A
I/O Options	Line1, line 2, microphone in, tape in, speaker out
Hard Drives supported	None
Floppy drives supported	None
Data Bus	16-bit ISA
Card Size	Three-quarter-length, full-height

CONNECTIONS
Function	Label	Function	Label
Line 2	CN1	Speaker out	CN5
Line 1	CN2	Unidentified	SENS
Microphone in	CN3	Volume	VOL
Tape in	CN4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	1/2 make/break ratio for pulse dialing on line 1 enabled	W5	Closed
	2/3 make/break ratio for pulse dialing on line 1 enabled	W5	Open
»	1/2 make/break ratio for pulse dialing on line 2 enabled	W6	Closed
	2/3 make/break ratio for pulse dialing on line 2 enabled	W6	Open
»	Sampling rate for both lines is 32 Kbps	W11	Closed
	Sampling rate for both lines is 44.5 Kbps	W11	Open
»	Factory configured - do not alter	W19	Unidentified
»	Factory configured - do not alter	W20	Unidentified
»	Factory configured - do not alter	W21	Unidentified
»	Factory configured - do not alter	W22	Unidentified
»	Factory configured - do not alter	W23	Unidentified
»	Factory configured - do not alter	W24	Unidentified
»	Factory configured - do not alter	W25	Unidentified

MICROPHONE /TAPE INPUT SELECTION
Setting		W1	W2
»	Line 1	Closed	Open
	Line 2	Open	Closed

SPEAKER OUTPUT SELECTION
Setting		W3	W4
»	Line 1	Closed	Open
	Line 2	Open	Closed
Note:This option is usually set according to microphone/tape input selection since the speaker is usually used to monitor the recording of messages from a tape player.

LINE 1 BASE I/O ADDRESS AND INTERRUPT SELECTION
IRQ	I/O Address	W7	W8
2	238h	Closed	Closed
3	270h	Open	Closed
5	230h	Closed	Open
7	278h	Open	Open

NSP TIMING SELECTION
Setting	W12	W13	W14	W15	W16	W17	W18
1.56	Off	On	Off	Off	Off	Off	Off
1.87	Off	Off	On	Off	Off	Off	Off
2.18	Off	Off	Off	On	Off	Off	Off
2.50	Off	Off	Off	Off	On	Off	Off
2.81	Off	Off	Off	Off	Off	On	Off
3.12	Off	Off	Off	Off	Off	Off	On
1.81	On	On	Off	Off	Off	Off	Off
2.19	On	Off	On	Off	Off	Off	Off
2.56	On	Off	Off	On	Off	Off	Off
2.94	On	Off	Off	Off	On	Off	Off
3.31	On	Off	Off	Off	Off	On	Off
3.69	On	Off	Off	Off	Off	Off	On

VR1, VR2 SELECTION
Label	Status	Condition
VR1	Turn clockwise	Amplify microphone input signal
VR2	Turn clockwise	Increase speaker output volume
Note:Location of VR1 and VR2 is unidentified.

DIAGNOSTIC LED(S)
LED	Status	Condition
L1	On	Hookswitch of line 1 is off-hook
L1	Off	Hookswitch of line 1 is on-hook
L2	On	Hookswitch of line 2 is off-hook
L2	Off	Hookswitch of line 2 is on-hook