CD-50 Optical drive card Settings and Configuration
TEAC CORPORATION
CD-50
Device Type | CD-ROM |
Interface | SCSI |
Size | 5.25 in. half height |
Spin Rate | Unidentified |
Formats Supported | CD-ROM (Mode 1), CD-DA, CD-XA (Mode 2, Form 1, Form 2) |
View | Bottom |
CONNECTIONS | |||
Function | Label | Function | Label |
Audio out | CN1 | ||
DRIVE SELECT ID | ||||
Drive ID | JP1/jumper 1 | JP1/jumper 2 | JP1/jumper 3 | |
0 | Open | Open | Open | |
1 | Closed | Open | Open | |
| » | 2 | Open | Closed | Open |
3 | Closed | Closed | Open | |
4 | Open | Open | Closed | |
5 | Closed | Open | Closed | |
6 | Open | Closed | Closed | |
7 | Closed | Closed | Closed | |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Parity check enabled | JP1/jumper 4 | Closed |
Parity check disabled | JP1/jumper4 | Open | |
| » | Double speed mode for data area only enabled | JP1/jumper 5 | Closed |
Normal speed mode for data & audio areas enabled | JP1/jumper 5 | Open | |
| » | Test mode disabled | JP1/jumper 6 | Open |
Test mode enabled | JP1/jumper 6 | Closed | |
| » | SCSI ID pins have their regular logic value (as shown in above table) | JP1/jumper 7 | Open |
SCSI ID pins have inverted logic value | JP1/jumper 7 | Closed | |
My Books
