RE2012P Network Card Settings and Configuration

Card Type	Ethernet
Maximum network Rate	10/20Mbps
Data Bus	16-bit ISA
Topology	Linear Bus/Star
Wiring Type	Unshielded twisted pair RG-58A/U 50ohm coaxial
Boot ROM	Available

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	Network collision has been detected
LED1	Yellow	Off	Network collision has not been detected
LED2	Green	On	Data is not being received
LED2	Green	Blinking	Data is being received
LED3	Green	On	Data is not being transmitted
LED3	Green	Blinking	Data is being transmitted
LED4	Green	On	10Base-T network connection is good
LED4	Green	Off	10Base-T network connection is broken