P1344 Network Card Settings and Configuration

NIC Type	Token Ring
Network Transfer Rate	4Mbps
Data Bus	16-bit ISA
Topology	Star
Wire Type	Shielded twisted pair
Boot ROM	Not available

CONNECTIONS
Function	Label
Shielded twisted pair	CN1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	ROMs installed in sockets enabled	JP1	Open
	Internal chipset ROM enabled	JP1	Closed
»	Factory configured - do not alter	JP3	Pins 1 & 2 closed
»	Memory refresh enabled	JP6	Pins 2 & 3 closed
	Memory refresh disabled	JP6	Pins 1 & 2 closed
»	BIOS enabled	JP9	Pins 2 & 3 closed
	BIOS disabled	JP9	Pins 1 & 2 closed
»	Burned-in address PROM enabled	JP32	Pins 2 & 3 closed
	Burned-in address PROM disabled	JP32	Pins 1 & 2 closed

BASE I/O ADDRESS
Setting		JP35	JP37	JP39	JP41	JP43	JP45
	0000h	Closed	Closed	Closed	Closed	Closed	Closed
	0010h	Closed	Closed	Closed	Closed	Closed	Closed
	0020h	Closed	Closed	Closed	Closed	Closed	Closed
	0030h	Closed	Closed	Closed	Closed	Closed	Closed
	0040h	Closed	Closed	Closed	Closed	Closed	Closed
»	0A20h	Closed	Closed	Closed	Closed	Open	Closed
	FFB0h	Open	Open	Open	Open	Open	Open
	FFC0h	Open	Open	Open	Open	Open	Open
	FFD0h	Open	Open	Open	Open	Open	Open
	FFE0h	Open	Open	Open	Open	Open	Open
	FFF0h	Open	Open	Open	Open	Open	Open

BASE I/O ADDRESS (CON’T)
Setting		JP47	JP49	JP51	JP53	JP55	JP57
	0000h	Closed	Closed	Closed	Closed	Closed	Closed
	0010h	Closed	Closed	Closed	Closed	Closed	Open
	0020h	Closed	Closed	Closed	Closed	Open	Closed
	0030h	Closed	Closed	Closed	Closed	Open	Open
	0040h	Closed	Closed	Closed	Open	Closed	Closed
»	0A20h	Open	Closed	Closed	Closed	Open	Closed
	FFB0h	Open	Open	Open	Closed	Open	Open
	FFC0h	Open	Open	Open	Open	Closed	Closed
	FFD0h	Open	Open	Open	Open	Closed	Open
	FFE0h	Open	Open	Open	Open	Open	Closed
	FFF0h	Open	Open	Open	Open	Open	Open
Note: A total of 4096 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. JP35 is the Most Significant Bit and jumper JP57 is the Least Significant Bit. The jumpers have the following decimal values: JP35=32768, JP37=16384, JP39=8192, JP41=4096, JP43=2048, JP45=1024, JP47=512, JP49=256, JP51=128, JP53=64, JP55=32, JP57=16. Open the jumpers and add the values of the jumpers that are open to obtain the correct memory address. (Open=1, Closed=0)

ROM SIZE
Size		JP12	JP15
»	(2) 8K x 8	Pins 1 & 2 closed	Pins 1 & 2, 3 & 4 closed
	(2) 16K x 8	Pins 2 & 3 closed	Pins 1 & 2, 3 & 4 closed
	(2) 32K x 8	Pins 2 & 3 closed	Pins 2 & 3, 4 & 5 closed

ROM ADDRESS
Setting		JP20	JP22	JP24	JP26	JP28	JP30
	0C0000h	Closed	Closed	Closed	Closed	Closed	Closed
	0C4000h	Open	Closed	Closed	Closed	Closed	Closed
	0C8000h	Closed	Open	Closed	Closed	Closed	Closed
	0CC000h	Open	Open	Closed	Closed	Closed	Closed
	0D0000h	Closed	Closed	Open	Closed	Closed	Closed
»	0D8000h	Closed	Open	Open	Closed	Closed	Closed
	CEC000h	Open	Open	Closed	Open	Open	Open
	CF0000h	Closed	Closed	Open	Open	Open	Open
	CF4000h	Open	Closed	Open	Open	Open	Open
	CF8000h	Closed	Open	Open	Open	Open	Open
	CFC000h	Open	Open	Open	Open	Open	Open
Note: A total of 64 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. JP30 is the Most Significant Bit and jumper JP20 is the Least Significant Bit. Note that there is a break between JP26 and JP28. The jumpers have the following decimal values: JP30=8,388,608, JP28=4,194,304, JP26=131,072, JP24=65,536, JP22=32,768, JP20=16,384. Open the jumpers and add the values of the jumpers that are open to obtain the correct memory address. (Open=1, Closed=0)

INTERRUPT
Setting		JP71	JP73	JP75	JP77	JP79	JP81	JP83	JP85	JP87
	IRQ3	Open	Open	Open	Open	Open	Open	Open	Open	Closed
	IRQ4	Open	Open	Open	Open	Open	Open	Open	Closed	Open
	IRQ5	Open	Open	Open	Open	Open	Open	Closed	Open	Open
	IRQ6	Open	Open	Open	Open	Open	Closed	Open	Open	Open
	IRQ7	Open	Open	Open	Open	Closed	Open	Open	Open	Open
	IRQ9	Open	Open	Open	Closed	Open	Open	Open	Open	Open
	IRQ10	Open	Open	Closed	Open	Open	Open	Open	Open	Open
	IRQ11	Open	Closed	Open	Open	Open	Open	Open	Open	Open
»	IRQ12	Closed	Open	Open	Open	Open	Open	Open	Open	Open

DMA CHANNEL
Setting		JP59	JP61	JP63	JP65	JP67	JP69
»	DMA5	Closed	Open	Open	Open	Open	Closed
	DMA6	Open	Closed	Open	Open	Closed	Open
	DMA7	Open	Open	Closed	Closed	Open	Open