ETHERPRO II Network Card Settings and Configuration

NETWORK INTERFACE TECHNOLOGY CORPORATION

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear Bus, Star
Wiring Type	Unshielded twisted pair RG58A/U 50ohm coaxial AUI transceiver via DB-15 port
Boot ROM	Available

BASE I/O ADDRESS SELECT
Address Range		J1
»	Software configured	Pins 1 & 2 closed
	360h	Pins 3 & 4 closed
	340h	Pins 5 & 6 closed
	320h	Pins 7 & 8 closed
	300h	Pins 9 & 10 closed
	2A0h	Pins 11 & 12 closed
	280h	Pins 13 & 14 closed
	240h	Pins 15 & 16 closed
	220h	Pins 17 & 18 closed
Note: These settings apply when the LAN card is not in ELNK/16BIT compatibility mode.

BASE I/O ADDRESS SELECT
Address Range		J1
»	Software configured	Pins 1 & 2 closed
	350h	Pins 3 & 4 closed
	330h	Pins 5 & 6 closed
	310h	Pins 7 & 8 closed
	300h	Pins 9 & 10 closed
	2E0h	Pins 11 & 12 closed
	2A0h	Pins 13 & 14 closed
	280h	Pins 15 & 16 closed
	250h	Pins 17 & 18 closed
Note: These settings apply when the LAN card is in ELNK/16BIT compatibility mode.

BASE MEMORY ADDRESS CONFIGURATION
Address Range		J3
»	Software configured	Pins 1 & 2 closed
	Disabled	Pins 3 & 4 closed
	DC000h	Pins 5 & 6 closed
	D8000h	Pins 7 & 8 closed
	D4000h	Pins 9 & 10 closed
	D0000h	Pins 11 & 12 closed
	CC000h	Pins 13 & 14 closed
	C8000h	Pins 15 & 16 closed
Note: These settings apply when the LAN card is not in ELNK/16BIT compatibility mode.

BASE MEMORY ADDRESS SELECT
Address Range		J3
»	Software configured	Pins 1 & 2 closed
	Disabled	Pins 3 & 4 closed
	DC000h	Pins 5 & 6 closed
	D8000h	Pins 7 & 8 closed
	CC000h	Pins 9 & 10 closed
	C8000h	Pins 11 & 12 closed
Note: These settings apply when the LAN card is in ELNK/16BIT compatibility mode.

COMPATIBILITY MODE
Mode		J4
»	Software configured	Pins 1 & 2 closed
	N2000 (C & T)	Pins 3 & 4 closed
	N2000 (STD)	Pins 5 & 6 closed
	N1000 TURBO	Pins 7 & 8 closed
	03EBT/13EBT	Pins 9 & 10 closed
	ELNKII/16BIT	Pins 11 & 12 closed

INTERRUPT SELECT
IRQ		J2
»	Software configured	Pins 1 & 2 closed
	IRQ15	Pins 3 & 4 closed
	IRQ11	Pins 5 & 6 closed
	IRQ10	Pins 7 & 8 closed
	IRQ7	Pins 9 & 10 closed
	IRQ5	Pins 11 & 12 closed
	IRQ4	Pins 13 & 14 closed
	IRQ3	Pins 15 & 16 closed
	IR/FONT>	Pins 17 & 18 closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	Off	No link established
LED1	Green	On	Link established
LED1	Green	Blinking	Data is being received
LED2	Red	Off	Polarity normal
LED2	Red	On	Polarity reversed
LED2	Red	Blinking	Data is being transmitted