S-NET NIC (REV. H & LATER) Network Card Settings and Configuration
MICRODYNE CORPORATION
S-NET NIC (REV. H & LATER)
NIC Type | S-Net |
Transfer Rate | 300/600Kbps |
Data Bus | 8-bit ISA |
Topology | Star |
Wiring Type | Belden 9184 Belden 9302 DSCC EDC4 IBM Type 1 |
Boot ROM | Available |
NETWORK SPEED | |
Speed | JP1 |
300Kbps | Pins 2 & 3 closed |
600Kbps | Pins 1 & 2 closed |
Note:The LAN speed must match that of the 68B server. | |
MISCELLANEOUS NOTES |
Rev.s E & G have solder pads in place of jumper JP1. The configuration is identical except instead of moving a jumper to set the speed, you must desolder and resolder the center pad with the proper side pad
|
My Books
