MT-950T Network Card Settings and Configuration

Card Type	Ethernet Transceiver
NIC Type	Ethernet
Network Transfer Rate	10Mbps
Topology	Linear Bus, Star
Wiring Type	Unshielded twisted pair AUI transceiver via DB-15 port
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	RJ-45 UTP connector	CN2

USER CONFIGURABLE SETTINGS
Function	Label	Position
í Signal Quality Error function disabled	SW1/1	Off
Signal Quality Error function enabled	SW1/1	On
í 10BASE-T compatibility enabled	SW1/2	On
10BASE-T compatibility disabled	SW1/2	Off
í Maintain the standard 100 meter cable length	SW1/3	Off
Extend from the standard 100 meter cable length	SW1/3	On

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Green	On	Power being received from AUI connector
PWR	Green	Off	Power not being received
TXD	Green	Blinking	Data is being transmitted
TXD	Green	Off	Data is not being transmitted
RXD	Green	Blinking	Data is being received
RXD	Green	Off	Data is not being received
COL	Amber	On	Collision detected on network
COL	Amber	Off	No collision detected on network
LNK	Green	On	A valid connection to the fiber optic connector - RX detected
LNK	Green	Off	No valid connection to the fiber optic connector - RX detected
POL	Green	On	Polarity normal
POL	Green	Off	Polarity reversed