MT-950C Network Card Settings and Configuration
MACROMATE CORPORATION
MT-950C
Card Type | Ethernet Transceiver |
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | RG-58A/U BNC connector | CN2 |
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
» Signal Quality Error function disabled | SQE | Off |
Signal Quality Error function enabled | SQE | On |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power being received from AUI connector |
PWR | Green | Off | Power not being received |
TXD | Green | Blinking | Data is being transmitted |
TXD | Green | Off | Data is not being transmitted |
RXD | Green | Blinking | Data is being received |
RXD | Green | Off | Data is not being received |
COL | Amber | On | Collision detected on network |
COL | Amber | Off | No collision detected on network |
JAB | Amber | On | A frame greater than 1518 bytes is being transmitted |
JAB | Amber | Off | Transmission is normal |
My Books
