IT-NE20 Network Card Settings and Configuration

NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit ISA
Topology	Linear bus
Wiring Type	AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial
Boot ROM	Available

INTERRUPT SELECT
IRQ		JP6/A	JP6/B	JP6/C	JP6/D	JP6/E	JP6/F
»	IRQ3	Open	Closed	Open	Open	Open	Open
	IR/FONT>	Closed	Open	Open	Open	Open	Open
	IRQ4	Open	Open	Closed	Open	Open	Open
	IRQ5	Open	Open	Open	Closed	Open	Open
	IRQ6	Open	Open	Open	Open	Closed	Open
	IRQ7	Open	Open	Open	Open	Open	Closed

I/O ADDRESS SELECT
Address		JP7/A	JP7/B	JP7/C
»	300h	Closed	Open	Closed
	200h	Open	Open	Open
	240h	Open	Closed	Open
	280h	Closed	Closed	Open
	2A0h	Open	Open	Closed
	320h	Closed	Open	Open
	340h	Open	Closed	Closed
	360h	Closed	Closed	Closed

CABLE TYPE
Type	JP9/A	JP9/B	JP9/C	JP9/D	JP9/E	JP9/F
Thick Ethernet	Open	Open	Open	Open	Open	Open
Thin Ethernet	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2	Pins 1 & 2
Note: All pins designated should be in the closed position.

BASE MEMORY ADDRESS SELECT
Address		JP8/A	JP8/B	JP8/C	JP8/D	JP8/E	JP8/F	JP8/G	JP8/H
»	C8000h	Open	Open	Closed	Open	Open	Open	Open	Open
	C0000h	Closed	Open	Open	Open	Open	Open	Open	Open
	C4000h	Open	Closed	Open	Open	Open	Open	Open	Open
	CC000h	Open	Open	Open	Closed	Open	Open	Open	Open
	D0000h	Open	Open	Open	Open	Closed	Open	Open	Open
	D4000h	Open	Open	Open	Open	Open	Closed	Open	Open
	D8000h	Open	Open	Open	Open	Open	Open	Closed	Open
	DC000h	Open	Open	Open	Open	Open	Open	Open	Closed