PCI-003 ETHERNET II Network Card Settings and Configuration

DTK COMPUTER, INC.

PCI-003 ETHERNET II

NIC Type	Ethernet
Network Transfer Rate	10Mbps
Data Bus	32-bit PCI
Topology	Linear Bus, Star
Wiring Type	Shielded twisted pair RG-58A/U 50ohm coaxial
Boot ROM	Available

CONNECTIONS
Function	Label	Function	Label
Shielded twisted pair port	CN1	RG-58A/U 50ohm coaxial port	CN2
Note: The locations of CN1 and CN2 are unidentified.

BASE I/O ADDRESS SELECTION
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5
	200	On	Off	Off	Off	Off
	220	On	Off	Off	Off	On
»	300	On	On	Off	Off	Off
	320	On	On	Off	Off	On
	3E0	On	On	On	On	On

INTERRUPT SELECTION
IRQ	J2/A	J2/B	J2/C	J2/D	J2/E
2	Closed	Open	Open	Open	Open
3	Open	Closed	Open	Open	Open
4	Open	Open	Closed	Open	Open
5 normal	Open	Open	Open	Closed	Open
5 I/O fetch	Open	Open	Open	Open	Closed
Note: The location of JP2/A is unidentified.

DMA SELECTION
DMA	J2/F	J2/G	J2/H	J2/I
1	Open	Closed	Open	Closed
3	Closed	Open	Closed	Open
Note: The location of JP2/A is unidentified.

CABLE TYPE SELECTION
Type		J1/A-F
»	RG-58A/U 50ohm coaxial	Pins 2 & 3 closed
	Shielded twisted pair	Pins 1 & 2 closed

PROM ADDRESS SELECTION
Address		SW1/6	SW1/7	SW1/8	SW1/9
	C000h	Off	Off	Off	Off
	C400h	On	Off	Off	Off
	C800h	Off	On	Off	Off
»	CC00h	On	On	Off	Off
	D000h	Off	Off	On	Off
	D400h	On	Off	On	Off
	D800h	Off	On	On	Off
	DC00h	On	On	On	Off
	E000h	Off	Off	Off	On
	E400h	On	Off	Off	On
	E800h	Off	On	Off	On
	EC00h	On	On	Off	On
	F000h	Off	Off	On	On
	F400h	On	Off	On	On
	F800h	Off	On	On	On
	FC00h	On	On	On	On

TECHNICAL NOTE

Note: The orientation of the card is unknown.