CN815E REV. B Network Card Settings and Configuration
CNET TECHNOLOGY, INC.
CN815E REV. B
NIC Type | Transceiver |
Transfer Rate | Unidentified |
Data Bus | Transceiver |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair` AUI Transceiver via DB-15 port |
Boot ROM | Not available |
TEST CONFIGURATION | |
Select | SW1 |
SQE test | Position 2 |
Link test | Position 1 |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LED1 | On | Link test enabled |
LED1 | Off | Link test disabled |
LED2 | On | Power on |
LED2 | Off | Power off |
LED3 | On | Network traffic detected |
LED3 | Blinking | Data is being received |
LED3 | Off | Data is not being received |
LED4 | On | Large load of data is being transmitted |
LED4 | Blinking | Normal load of data is being transmitted |
LED4 | Off | Data is not being transmitted |
LED5 | On | Collision detected on port |
LED5 | Blinking | Twisted-pair to transceiver connection is broken |
LED5 | Off | No collision is detected |
LED6 | On | Polarity is good |
LED6 | Off | Polarity is reversed |
My Books
