FD-200R Network Card Settings and Configuration
ATC/UNITRON COMPUTERS AND COMPUTER PARTS
FD-200R
Card Type | Ethernet Repeater |
Chip Set | Unidentified |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus |
Wiring Type | RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port |
CONNECTIONS | |||
Function | Label | Function | Label |
AC power in | CN1 | AUI transceiver port 2 | CN4 |
AUI transceiver port 1 | CN2 | RG-58A/U 50ohm coaxial port 2 | CN5 |
RG-58A/U 50ohm coaxial port 1 | CN3 | Power switch | SW2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | 230VAC power in | SW1 | Off |
| 115VAC power in | SW1 | On | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Green | On | Power is on |
PWR | Green | Off | Power is off |
OFFA | Red | On | Network connection on port 1 is broken |
OFFA | Red | Off | Network connection on port 1 is good |
RXA | Green | On | Modem is receiving data from port 1 |
RXA | Green | Off | Modem is not receiving data from port 1 |
TXA | Green | On | Modem is transmitting data to port 1 |
TXA | Green | Off | Modem is not transmitting data to port 1 |
OFFB | Red | On | Network connection on port 2 is broken |
OFFB | Red | Off | Network connection on port 2 is good |
RXB | Green | On | Modem is receiving data from port 2 |
RXB | Green | Off | Modem is not receiving data from port 2 |
TXB | Green | On | Modem is transmitting data to port 2 |
TXB | Green | Off | Modem is not transmitting data to port 2 |
LED1 | Green | On | Port 1 is using AUI connector |
LED1 | Green | Off | Port 1 is using RG-58A/U connector |
LED2 | Green | On | Port 2 is using AUI connector |
LED2 | Green | Off | Port 2 is using RG-58A/U connector |
My Books
