10BASET MINI MAU Network Card Settings and Configuration
ASANTE TECHNOLOGIES, INC.
10BASET MINI MAU
Card Type | Ethernet Transceiver |
Maximum Network Rate | 10Mbps |
Data Bus | AUI |
Topology | Star |
Wiring Type | Unshielded twisted pair |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI connector | CN1 | Unshielded twisted pair | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Correct signal if polarity is reversed | SW1/1 | On |
Do not correct signal if polarity is reversed | SW1/1 | Off | |
| » | Link integrity function enabled | SW1/2 | On |
Link integrity function disabled | SW1/2 | Off | |
| » | Heartbeat function disabled | SW1/3 | On |
Heartbeat function enabled | SW1/3 | Off | |
Note: The signal inversion correction should always be enabled when an Asante hub is used. | |||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Transceiver is receiving power |
LED1 | Green | Off | Transceiver is not receiving power |
LED2 | Green | On | Network connection is good |
LED2 | Green | Off | Network connection is broken |
LED3 | Green | On | Transceiver is receiving from network |
LED3 | Green | Off | Transceiver is not receiving from network |
LED4 | Green | On | Transceiver is transmitting to network |
LED4 | Green | Off | Transceiver is not transmitting to network |
LED5 | Yellow | On | 10Base-T polarity reversed |
LED5 | Yellow | Off | 10Base-T polarity correct |
LED6 | Yellow | On | Network collision detected |
LED6 | Yellow | Off | Network collision not detected |
My Books
