NT928SPP Motherboard Settings and Configuration

Processor	Pentium Pro
Processor Speed	150/166/180/200/210/233/240/266/270/300MHz
Chip Set	Intel
Video Chip Set	None
Maximum Onboard Memory	512MB (EDO supported)
Maximum Video Memory	None
Cache	256/512KB (located on Pentium Pro CPU)
BIOS	AMI/Award/Phoenix
Dimensions	305mm x 244mm
I/O Options	32-bit PCI slots (4), floppy drive interface, green PC connector, IDE interfaces (2), Ultra-SCSI Wide interface, SCSI interface, parallel port, PS/2 mouse port, serial ports (2), ATX power connector, USB connector, IR connector
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
ATX power connector	ATX	Speaker	J31 pins 1 - 4
Serial port	CN1	Power LED & keylock	J31 pins 6 - 10
Parallel port	CN2	Reset switch	J31 pins 11 & 12
PS/2 mouse port	CN3	SCSI LED	J31 pins 13 & 14
Serial port	CN4	IDE interface LED	J31 pins 15 & 16
Floppy drive interface	CN5	Green PC connector	J31 pins 17 & 18
IDE interface	CN6	Turbo LED	J31 pins 19 & 20
IDE interface	CN7	Power on/off switch	JP7
SCSI interface	CN8	Remote power switch	JP8
Ultra-SCSI Wide interface	CN9	32-bit PCI slots	PC1 – PC4
Note: The location of the IR &USB connectors are unidentified.

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J32	Unidentified
	Wide SCSI enabled	J33	Closed
	Wide SCSI disabled	J33	Open
»	Auto power enabled	JP5	Closed
	Auto power disabled	JP5	Open
»	Factory configured - do not alter	JP6	Unidentified
	SCSI chip enabled	JP11	Pins 1 & 2 closed
	SCSI chip disabled	JP11	Pins 2 & 3 closed
»	Factory configured - do not alter	JP14	Unidentified
»	Factory configured - do not alter	JP15	Unidentified

DRAM CONFIGURATION
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
136MB	(2) 16M x 36	(2) 1M x 36
144MB	(2) 16M x 36	(2) 2M x 36

DRAM CONFIGURATION (CON’T)
Size	Bank 0	Bank 1
160MB	(2) 16M x 36	(2) 4M x 36
192MB	(2) 16M x 36	(2) 8M x 36
256MB	(2) 32M x 36	None
256MB	(2) 16M x 36	(2) 16M x 36
264MB	(2) 32M x 36	(2) 1M x 36
272MB	(2) 32M x 36	(2) 2M x 36
288MB	(2) 32M x 36	(2) 4M x 36
320MB	(2) 32M x 36	(2) 8M x 36
384MB	(2) 32M x 36	(2) 16M x 36
512MB	(2) 32M x 36	(2) 32M x 36
Note: Board accepts EDO memory. Board also accepts x 32 SIMMs. The location of banks 0 & 1 are unidentified.

CACHE CONFIGURATION

Note: 256KB/512KB cache is located on the Pentium Pro CPU.

CPU SPEED SELECTION
Speed	JP17
150MHz	Pins 1 & 2 closed
166MHz	Pins 3 & 4 closed
180MHz	Pins 5 & 6 closed
200MHz	Pins 7 & 8 closed
210MHz	Pins 9 & 10 closed
233MHz	Pins 11 & 12 closed
240MHz	Pins 13 & 14 closed
266MHz	Pins 15 & 16 closed
270MHz	Pins 17 & 18 closed
300MHz	Pins 19 & 20 closed

VOLTAGE SOURCE SELECTION
Setting	JP1
3.3v from on board regulator	Pins 3 & 5, 4 & 6 closed
3.3v from ATX power supply	Pins 1 & 3, 2 & 4 closed

SCSI TERMINATION SELECTION (LOW)
Setting		JP16
»	Low byte controlled by BIOS	Pins 2 & 3 closed
	Low byte terminator on	Pins 1 & 2 closed
	Low byte terminator off	Open

SCSI TERMINATION SELECTION (HIGH)
Setting		JP18
»	High byte terminator on	Pins 1 & 2 closed
	High byte terminator off	Open
	High byte controlled by BIOS	Pins 2 & 3 closed