INFORMTECH INTERNATIONAL, INC.
IT486EX VER. 1
Processor | 80486SX/80486DX |
Processor Speed | 25/33MHz |
Chip Set | Intel |
Max. Onboard DRAM | 64MB |
Cache | 64/128KB (with external cache card) |
BIOS | Phoenix |
Dimensions | 330mm x 218mm |
I/O Options | None |
NPU Options | 4167 |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Turbo switch | P1 | Reset switch | P4 |
Turbo LED | P2 | Power LED & keylock | P5 |
Speaker | P3 | External battery | P20 |
USER CONFIGURABLE SETTINGS | |||
Function | Jumper/Switch | Position | |
» | Cache write protect disabled | J5 | Closed |
Cache write protect enabled | J5 | Open | |
» | On board DRAM access enabled | J8 | Closed |
On board DRAM access disabled | J8 | Open | |
» | I/O recovery time select 8-bit = 11BLCK, 16-bit = 3BLCK | J16 | Closed |
No recovery time | J16 | Open | |
» | 80486 internal cache enabled | J17 | Closed |
80486 internal cache disabled | J17 | Open | |
» | Turbocache486 enabled | J20 | Closed |
Turbocache486 disabled | J20 | Open | |
» | BIOS duplicated (to 00FF0000 hex) | J36 | Closed |
BIOS not duplicated | J36 | Open | |
» | Turbo mode enabled | P1 | Open |
Turbo mode disabled | P1 | Closed | |
» | Factory configured - do not alter | SW1/7 | Off |
» | Monitor type select monochrome | SW1/8 | Off |
Monitor type select color | SW1/8 | On | |
DRAM CONFIGURATION | ||||
Size | Bank 0 | Bank 1 | Bank 2 | Bank 3 |
2MB | (4) 256K x 9 | (4) 256K x 9 | NONE | NONE |
4MB | (4) 256K x 9 | (4) 256K x 9 | (4) 256K x 9 | (4) 256K x 9 |
8MB | (4) 1M x 9 | (4) 1M x 9 | NONE | NONE |
10MB | (4) 256K x 9 | (4) 256K x 9 | (4) 1M x 9 | (4) 1M x 9 |
10MB | (4) 1M x 9 | (4) 1M x 9 | (4) 256K x 9 | (4) 256K x 9 |
16MB | (4) 1M x 9 | (4) 1M x 9 | (4) 1M x 9 | (4) 1M x 9 |
32MB | (4) 4M x 9 | (4) 4M x 9 | NONE | NONE |
34MB | (4) 4M x 9 | (4) 4M x 9 | (4) 256K x 9 | (4) 256K x 9 |
34MB | (4) 256K x 9 | (4) 256K x 9 | (4) 4M x 9 | (4) 4M x 9 |
40MB | (4) 4M x 9 | (4) 4M x 9 | (4) 1M x 9 | (4) 1M x 9 |
40MB | (4) 1M x 9 | (4) 1M x 9 | (4) 4M x 9 | (4) 4M x 9 |
64MB | (4) 4M x 9 | (4) 4M x 9 | (4) 4M x 9 | (4) 4M x 9 |
MEMORY BANK CONFIGURATION (BANK 0 & 1) | ||
SIMM Type | SW1/1 | SW1/2 |
No memory installed | Off | Off |
256KB | On | Off |
1MB | Off | On |
4MB | On | On |
MEMORY BANK CONFIGURATION (BANK 2 & 3) | ||
SIMM Type | SW1/3 | SW1/4 |
No memory installed | Off | Off |
256KB | On | Off |
1MB | Off | On |
4MB | On | On |
MEMORY SPEED/CPU MHZ CONFIGURATION (25MHZ) | ||
SIMM Type | SW1/5 | SW1/6 |
256KB | Off | Off |
1MB | On | On |
4MB | On | On |
Note: SW1/5 corresponds to Banks 0 & 1 and SW1/6 corresponds to Banks 2 & 3. | ||
MEMORY SPEED/CPU MHZ CONFIGURATION (33MHZ) | ||
SIMM Type | SW1/5 | SW1/6 |
256KB | Off | Off |
1MB | On | On |
4MB | Off | Off |
Note: SW1/5 corresponds to Banks 0 & 1 and SW1/6 corresponds to Banks 2 & 3. | ||
TURBOCACHE486 CONFIGURATION | |||
Module | J17 | J18 | J19 |
82485ES | Open | Open | Open |
82485MA/MB | Closed | Closed | Closed |
TURBOCACHE486 JUMPER CONFIGURATION | ||||
Module | J1 | J2 | J29 | J63 |
82485ES | Open | Open | Open | Open |
82485MA/MB | Closed | Closed | Closed | Closed |
CPU SPEED CONFIGURATION | ||
Speed | J3 | J15 |
25MHz | pins 2 & 3 closed | Closed |
33MHz | pins 1 & 2 closed | Open |
BATTERY TYPE CONFIGURATION | |
Battery type | J64 |
4.5V (without internal current limiting resistor) | pins 3 & 4 closed |
3.6V-4.5V (with internal current limiting resistor) | pins 1 & 3 closed |
6V (without internal current limiting resistor) | pins 2 & 4 closed |
6V (with internal current limiting resistor) | pins 1 & 2 closed |
BIOS CONTROL CONFIGURATION | ||
ROM type | J25 | J35 |
28F512 | Closed | Closed |
28F010 | Closed | Open |
27C512 | Open | Closed |
27C010 | Open | Open |