PRM-0082I (VER. 1.01) Motherboard Settings and Configuration
DTK COMPUTER, INC.
PRM-0082I (VER. 1.01)
Device Type | Mainboard |
Processor | Pentium II |
Processor Speed | 233/266/300/333MHz |
Chip Set | Intel 440EX |
Audio Chip Set | ESS |
Maximum Onboard Memory | 512MB (EDO & SDRAM supported) |
Cache | 256/512KB (located on the Pentium II CPU) |
BIOS | Award |
Dimensions | 244mm x 210mm |
I/O Options | 32-bit PCI slots (2), floppy drive interface, game/MIDI port, IDE interfaces (2), parallel port, PS/2 mouse port, serial ports (2), IR connector, USB connectors (2), ATX power connector, AGP slot, line in, line out, microphone in, audio in – CD-ROMs (2) |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
AGP slot | AGP | Reset switch | J3 |
ATX power connector | ATX | Keylock | J5 |
Microphone in | CN1 | IDE interface LED | J6 |
Line in | CN2 | IR connector | J7 |
Line out | CN3 | IDE interface 1 | J9 |
Serial port 1 | CN4 | IDE interface 2 | J10 |
Parallel port | CN5 | Audio in – CD-ROM (Sony) | J11 |
Serial port 2 | CN6 | Audio in – CD-ROM (Panasonic) | J15 |
USB connector | CN7 & CN8 | CPU fan power | J16 |
PS/2 mouse port | CN9 | Floppy drive interface | J19 |
Game/MIDI port | CN14 | Wake on LAN connector | JP5 |
Speaker | J1 | 32-bit PCI slots | PC1 - PC |
Power switch | J2 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | CMOS memory normal operation | J4 | Pins 2 & 3 closed |
CMOS memory clear | J4 | Pins 1 & 2 closed | |
System on after power failure | J24 | Closed | |
System off after power failure | J24 | Open | |
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
8MB | (1) 1M x 64 | None |
16MB | (1) 2M x 64 | None |
16MB | (1) 1M x 64 | (1) 1M x 64 |
24MB | (1) 2M x 64 | (1) 1M x 64 |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
40MB | (1) 4M x 64 | (1) 1M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 8M x 64 | None |
64MB | (1) 4M x 64 | (1) 4M x 64 |
72MB | (1) 8M x 64 | (1) 1M x 64 |
80MB | (1) 8M x 64 | (1) 2M x 64 |
96MB | (1) 8M x 64 | (1) 4M x 64 |
DIMM CONFIGURATION (CON’T) | ||
Size | Bank 0 | Bank 1 |
128MB | (1) 16M x 64 | None |
128MB | (1) 8M x 64 | (1) 8M x 64 |
136MB | (1) 16M x 64 | (1) 1M x 64 |
144MB | (1) 16M x 64 | (1) 2M x 64 |
160MB | (1) 16M x 64 | (1) 4M x 64 |
192MB | (1) 16M x 64 | (1) 8M x 64 |
256MB | (1) 16M x 64 | (1) 16M x 64 |
288MB | (1) 32M x 64 | (1) 4M x 64 |
320MB | (1) 32M x 64 | (1) 8M x 64 |
384MB | (1) 32M x 64 | (1) 16M x 64 |
512MB | (1) 32M x 64 | (1) 32M x 64 |
Note: Board will accept up to 256MB SDRAM or 512MB EDO memory. | ||
CACHE CONFIGURATION |
The 256/512KB cache is located on the Pentium II CPU. |
CPU SPEED SELECTION | |||
CPU speed | Clock speed | Multiplier | JP2 |
233MHz | 66MHz | 3.5x | Pins 5 & 6 closed |
266MHz | 66MHz | 4x | Pins 1 & 2, 3 & 4 closed |
300MHz | 66MHz | 4.5x | Pins 3 & 4 closed |
333MHz | 66MHz | 5x | Pins 1 & 2 closed |
My Books
