DELL COMPUTER CORPORATION
DIMENSION XPS PXXXA/MXXXA
Processor | Pentium |
Processor Speed | 133/166/200MHz |
Chip Set | Intel |
Video Chip Set | S3 |
Maximum Onboard Memory | 64MB (EDO supported) |
Maximum Video Memory | 2MB |
Cache | 256/512KB |
BIOS | Unidentified |
Dimensions | 305mm x 244mm |
I/O Options | 32-bit PCI slots (3), floppy drive interface, IDE interfaces (2), parallel port, PS/2 mouse port, serial port, VGA feature connector, VGA port, cache slot, USB connectors (2), ATX power connector |
NPU Options | None |

CONNECTIONS | |||
Purpose | Location | Purpose | Location |
ATX power connector | ATX | IDE interface 2 | CN8 |
VGA port | CN1 | IDE interface 1 | CN9 |
Parallel port | CN2 | Floppy drive interface | CN10 |
Serial port 1 | CN3 | Chassis fan power | J7M1 |
USB connector | CN4 | Front panel connector | J9E1 |
USB connector | CN5 | 32-bit PCI slots | PC1 – PC3 |
PS/2 mouse port | CN6 | Cache slot | SL1 |
VESA feature connector | CN7 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | C1 | Unidentified |
» | Factory configured - do not alter | C2 | Unidentified |
Password enabled | J1A | Pins 1 & 2 closed | |
Password disabled | J1A | Pins 2 & 3 closed | |
» | CMOS memory normal operation | J1A | Pins 4 & 5 closed |
CMOS memory clear | J1A | Pins 5 & 6 closed | |
Setup access enabled | J1B | Pins 1 & 2 closed | |
Setup access disabled | J1B | Pins 2 & 3 closed | |
» | Factory configured - do not alter | J1B/pins 4 - 6 | Open |
DIMM CONFIGURATION | ||
Size | Bank 0 | Bank 1 |
16MB | (1) 2M x 64 | None |
32MB | (1) 4M x 64 | None |
32MB | (1) 2M x 64 | (1) 2M x 64 |
48MB | (1) 4M x 64 | (1) 2M x 64 |
64MB | (1) 4M x 64 | (1) 4M x 64 |
Note: Board accepts EDO memory. The location of the banks is unidentified. | ||
CACHE CONFIGURATION | |
Size | SL1 |
256KB | 256KB module installed |
512KB | 512KB module installed |
VIDEO MEMORY CONFIGURATION |
Note: The location of the video memory is unidentified. |
CPU SPEED SELECTION | ||||
CPU speed | Clock speed | Multiplier | J1C | J1D |
133MHz | 66MHz | 2x | 1 & 2, 5 & 6 | 2 & 3, 4 & 5 |
166MHz | 66MHz | 2.5x | 1 & 2, 5 & 6 | 2 & 3, 5 & 6 |
200MHz | 66MHz | 3x | 1 & 2, 5 & 6 | 1 & 2, 5 & 6 |
Note: Pins designated should be in the closed position. | ||||