MULTI-FUNCTION ETHERNET+MODEM/FAX (EN2218-2) modem/telephone/ISDN Settings and Configuration

Card Type	Modem (synchronous/asynchronous), Ethernet
Chipset	Unidentified
Maximum Onboard Memory	32KB DRAM/128KB Flash RAM
Network Transfer Rate	10Mbps
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	PCMCIA Type II
Fax Class	Class I
Data Modulation	Bell 103A/212A ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis
Fax Modulation	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, MNP10, V.42, V.42bis
Topology	Linear Bus/Star
Wire Type	Unshielded twisted pair RG-58A/U 50ohm coaxial
Boot ROM	Not available

CONNECTIONS
Function	Label	Function	Label
MAU connector	CN1	Unshielded twisted pair connector	CN3
RG-58A/U 50ohm coaxial connector	CN2	Telephone line out	CN4

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LINK	Green	On	Network connection is good
LINK	Green	Off	Network connection is broken
OH	Green	On	Modem is off-hook
OH	Green	Off	Modem is on-hook

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, C, D, E, H, I, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X

Extended AT Commands

\K, \N

%C, %E, %L, %Q

S-Registers

S0, S6, S7, S8

Note: See MHI documentation for complete descriptions.

PROTOCOL/SPEED
Type:	Configuration
Format:	AT [cmds] Fn [cmds]
Description:	Selects the protocol and speed the modem will attempt to connect at.
Command	Function
F0	Auto-detect the highest common connect speed.
F1	Select V.21 or Bell 103 at 300bps speed.
F3	Select V.23 at 75/1200bps speed.
F4	Select V.22 or Bell 212A at 1200bps speed.
F5	Select V.22bis at 2400bps speed.
F6	Select V.32/V.32bis at 4800bps speed.
F7	Select V.32bis at 7200bps speed.
F8	Select V.32/V.32bis at 9600bps speed.
F9	Select V.32bis at 12Kbps speed.
F10	Select V.32bis at 14.4Kbps speed