SST-64I IO card Settings and Configuration

Card Type	Serial
Chip Set	Equinox
I/O Options	Serial ports (64)
Data Bus	16-bit ISA

CONNECTIONS
Function	Label
Serial ports via DB-26 connector	CN1
Note:Standard DB-25 or RJ-45 serial ports are provided by up to eight external 16-port modular expansion boxes.

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	J2	Pins 1 & 2, 4 & 5 closed

BASE I/O ADDRESS
Setting	S1/1	S1/2	S1/3	S1/4
200h	Off	Off	Off	Off
220h	On	Off	Off	Off
240h	Off	On	Off	Off
260h	On	On	Off	Off
280h	Off	Off	On	Off
2A0h	On	Off	On	Off
2C0h	Off	On	On	Off
2E0h	On	On	On	Off
300h	Off	Off	Off	On
320h	On	Off	Off	On
340h	Off	On	Off	On
360h	On	On	Off	On
380h	Off	Off	On	On
3A0h	On	Off	On	On
3C0h	Off	On	On	On
3E0h	On	On	On	On

MISCELLANEOUS TECHNICAL NOTE

Switch S1 may be in one of two locations. On older cards, the switch is located on the upper-right hand corner of the card as shown in the picture. On more recent cards, the switch is located at the top of the rear bracket.