MAKO IO card Settings and Configuration
BITTWARE RESEARCH SYSTEMS
MAKO
Card Type | Expansion card |
Chip Set | Analog Devices, Inc. |
Maximum Onboard Memory | 3MB SRAM |
I/O Options | 90-pin connectors (4) |
Data Bus | None |
CONNECTIONS | |||
Function | Label | Function | Label |
SHARCPAC interface connector 1 | J1 | SHARCPAC interface connector 3 | J3 |
SHARCPAC interface connector 2 | J2 | SHARCPAC interface connector 4 | J4 |
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
Configure external memory bank as External Memory Bank 0 | J13 | Pins 1 & 2 closed |
Configure external memory bank as External Memory Bank 1 | J13 | Pins 2 & 3 closed |
SRAM CONFIGURATION | |||
Size | Bank 0 | Bank 1 | |
| » | 2MB | (4) 512KB | None |
3MB | (4) 512KB | (2) 512KB | |
Note: The board can be configured to use either 32-bit SRAM or both 32-bit and 42-bit SRAM. | |||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
D1 | Unidentified | Unidentified | DSP A programming diagnostic LED |
D2 | Unidentified | Unidentified | DSP B programming diagnostic LED |
Note: The function of the LED’s is unidentified. | |||
MISCELLANEOUS TECHNICAL NOTES |
The Mako is available in a variety of configurations. Different factory configurations allow for single or multiple processors of different types and speeds. |
My Books
