APC INTERFACE #AP9500 IO card Settings and Configuration
AMERICAN POWER AND CONVERSION CORPORATION
APC INTERFACE #AP9500
Card Type | UPS monitor |
Chipset Controller | Unidentified |
I/O Options | UPS control ports (2) |
Maximum DRAM | N/A |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Novell/PowerChute mouse port | J1 | Novell 1/8" jack | J2 |
ADDRESS SELECTION | ||
» Address | SW1/1 | |
| » | 231h | Off |
| » | 240h | On |
LOW BATTERY SIGNAL CONFIGURATION | ||
» Mode | SW1/2 | |
| » | APCC brand UPS | Off |
| » | All other brands | Unidentified |
Note: If using a different brand of UPS, call the manufacturer to determine this setting. | ||
UPS SHUTDOWN CONFIGURATION | ||
» Mode | SW1/3 | |
| » | Disabled | Off |
| » | Enabled | On |
Note: This setting should be enabled only when using the mouse port configured with PowerChute for Novell. | ||
CONNECTOR SELECTION | |
Type | SW1/4 |
1/8" jack | Off |
Mouse port | On |
My Books
