5504DACL REV.1 IO card Settings and Configuration

AMERICAN DATA AQUISITION CORPORATION

5504DACL REV.1

Card Type
Data Aquisition
Chip Set
None
Maximum Onboard Memory
Unidentified
I/O Options
Analog input, digital input
Data Bus
8-bit ISA
Card Size
Three-quarter length

CONNECTIONS
Function
Label
Function
Label
37-pin analog/digital signals connector
J1
Bipolar offset selector (Channel 1)
R106
Bipolar offset selector ( Channel 3)
R100
A/D converter range selector (Channel 1)
R107
A/D converter range selector (Channel 3)
R101
Unipolar offset selector (Channel 1)
R108
Unipolar offset selector (Channel 3)
R102
Bipolar offset selector (Channel 0)
R109
Bipolar offset selector (Channel 2)
R103
A/D converter range selector (Channel 0)
R110
A/D converter range selector (Channel 2)
R104
Unipolar offset selector (Channel 0)
R111
Unipolar offset selector (Channel 2)
R105

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
Factory configured - do not alter
JP1
Unidentified
»
Factory configured - do not alter
JP2
Unidentified
»
Factory configured - do not alter
JP3
Unidentified
»
Factory configured - do not alter
JP4
Unidentified
»
Factory configured - do not alter
JP5
Unidentified
»
Factory configured - do not alter
JP6
Unidentified
»
Factory configured - do not alter
JP7
Unidentified
»
Factory configured - do not alter
JP8
Unidentified
»
Factory configured - do not alter
JP9
Unidentified
»
Factory configured - do not alter
JP10
Unidentified
»
Factory configured - do not alter
JP11
Unidentified
»
Factory configured - do not alter
JP12
Unidentified

BASE I/O ADDRESS SELECTION
Setting
W9
W8
W7
W6
W5
W4
W3

000h
Open
Open
Open
Open
Open
Open
Open

008h
Open
Open
Open
Open
Open
Open
Closed

010h
Open
Open
Open
Open
Open
Closed
Open

018h
Open
Open
Open
Open
Open
Closed
Closed

020h
Open
Open
Open
Open
Closed
Open
Open
»
110h
Open
Closed
Open
Open
Open
Closed
Open

3D8h
Closed
Closed
Closed
Closed
Open
Closed
Closed

3E0h
Closed
Closed
Closed
Closed
Closed
Open
Open

3E8h
Closed
Closed
Closed
Closed
Closed
Open
Closed

3F0h
Closed
Closed
Closed
Closed
Closed
Closed
Open

3F8h
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Note: A total of 128 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. W9 is the Most Significant Bit and switch W3 is the Least Significant Bit. The switches have the following decimal values:W9=512, W8=256, W7=128, W6=64, W5=32, W4=16, W3=8. Turn off the switches and add the values of the switches to obtain the correct memory address. (Close=1, Open=0)

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

5504DACL REV.1 IO card Settings and Configuration

Search

My Books

Discover

Card Type	Data Aquisition
Chip Set	None
Maximum Onboard Memory	Unidentified
I/O Options	Analog input, digital input
Data Bus	8-bit ISA
Card Size	Three-quarter length

CONNECTIONS
Function	Label	Function	Label
37-pin analog/digital signals connector	J1	Bipolar offset selector (Channel 1)	R106
Bipolar offset selector ( Channel 3)	R100	A/D converter range selector (Channel 1)	R107
A/D converter range selector (Channel 3)	R101	Unipolar offset selector (Channel 1)	R108
Unipolar offset selector (Channel 3)	R102	Bipolar offset selector (Channel 0)	R109
Bipolar offset selector (Channel 2)	R103	A/D converter range selector (Channel 0)	R110
A/D converter range selector (Channel 2)	R104	Unipolar offset selector (Channel 0)	R111
Unipolar offset selector (Channel 2)	R105

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP1	Unidentified
»	Factory configured - do not alter	JP2	Unidentified
»	Factory configured - do not alter	JP3	Unidentified
»	Factory configured - do not alter	JP4	Unidentified
»	Factory configured - do not alter	JP5	Unidentified
»	Factory configured - do not alter	JP6	Unidentified
»	Factory configured - do not alter	JP7	Unidentified
»	Factory configured - do not alter	JP8	Unidentified
»	Factory configured - do not alter	JP9	Unidentified
»	Factory configured - do not alter	JP10	Unidentified
»	Factory configured - do not alter	JP11	Unidentified
»	Factory configured - do not alter	JP12	Unidentified

BASE I/O ADDRESS SELECTION
Setting		W9	W8	W7	W6	W5	W4	W3
	000h	Open	Open	Open	Open	Open	Open	Open
	008h	Open	Open	Open	Open	Open	Open	Closed
	010h	Open	Open	Open	Open	Open	Closed	Open
	018h	Open	Open	Open	Open	Open	Closed	Closed
	020h	Open	Open	Open	Open	Closed	Open	Open
»	110h	Open	Closed	Open	Open	Open	Closed	Open
	3D8h	Closed	Closed	Closed	Closed	Open	Closed	Closed
	3E0h	Closed	Closed	Closed	Closed	Closed	Open	Open
	3E8h	Closed	Closed	Closed	Closed	Closed	Open	Closed
	3F0h	Closed	Closed	Closed	Closed	Closed	Closed	Open
	3F8h	Closed	Closed	Closed	Closed	Closed	Closed	Closed
Note: A total of 128 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. W9 is the Most Significant Bit and switch W3 is the Least Significant Bit. The switches have the following decimal values:W9=512, W8=256, W7=128, W6=64, W5=32, W4=16, W3=8. Turn off the switches and add the values of the switches to obtain the correct memory address. (Close=1, Open=0)