5803HR, 5804HR IO card Settings and Configuration

AMERICAN DATA AQUISITION CORPORATION

5803HR, 5804HR

Card Type
Data Aquisition
Chip Set
Unidentified
Maximum Onboard Memory
Unidentified
I/O Options
Analog input, digital input
Hard Drives supported
None
Floppy drives supported
None
Data Bus
16-bit ISA
Card Size
Full-length

CONNECTIONS
Function
Label
Function
Label
40-pin header to 37-pin analog/digital signals connector via cable
J1
DAC1 range selector
P6
40-pin header to 37-pin analog/digital signals connector via cable
J2
A/D converter offset selector
P11
50-pin analog/digital signals connector
J8
A/D converter range selector
P12
DAC0 unipolar offset selector
P1
A/D converter x10 gain selector
P13
DAC0 bipolar offset selector
P2
A/D converter x100 gain selector
P14
DACO range selector
P3
A/D converter x500 gain selector
P15
DAC1 unipolar offset selector
P4
A/D converter common mode selector
P16
DAC1 bipolar offset selector
P5

BASE I/O ADDRESS SELECTION
Setting
SW1/1
SW1/2
SW1/3
SW1/4
SW1/5

000h
Off
Off
Off
Off
Off

020h
Off
Off
Off
Off
On

040h
Off
Off
Off
On
Off

060h
Off
Off
Off
On
On

080h
Off
Off
On
Off
Off
»
120h
Off
On
Off
Off
On

360h
On
On
Off
On
On

380h
On
On
On
Off
Off

3A0h
On
On
On
Off
On

3C0h
On
On
On
On
Off

3E0h
On
On
On
On
On
Note:
A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/1 is the Most Significant Bit and jumper SW1/5 is the Least Significant Bit. The jumpers have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32. Turn off the switches and add the values of the switches to obtain the correct memory address. (On=1, 0ff=0)

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

5803HR, 5804HR IO card Settings and Configuration

Search

My Books

Discover

Card Type	Data Aquisition
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Analog input, digital input
Hard Drives supported	None
Floppy drives supported	None
Data Bus	16-bit ISA
Card Size	Full-length

CONNECTIONS
Function	Label	Function	Label
40-pin header to 37-pin analog/digital signals connector via cable	J1	DAC1 range selector	P6
40-pin header to 37-pin analog/digital signals connector via cable	J2	A/D converter offset selector	P11
50-pin analog/digital signals connector	J8	A/D converter range selector	P12
DAC0 unipolar offset selector	P1	A/D converter x10 gain selector	P13
DAC0 bipolar offset selector	P2	A/D converter x100 gain selector	P14
DACO range selector	P3	A/D converter x500 gain selector	P15
DAC1 unipolar offset selector	P4	A/D converter common mode selector	P16
DAC1 bipolar offset selector	P5

BASE I/O ADDRESS SELECTION
Setting		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5
	000h	Off	Off	Off	Off	Off
	020h	Off	Off	Off	Off	On
	040h	Off	Off	Off	On	Off
	060h	Off	Off	Off	On	On
	080h	Off	Off	On	Off	Off
»	120h	Off	On	Off	Off	On
	360h	On	On	Off	On	On
	380h	On	On	On	Off	Off
	3A0h	On	On	On	Off	On
	3C0h	On	On	On	On	Off
	3E0h	On	On	On	On	On
Note: A total of 32 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/1 is the Most Significant Bit and jumper SW1/5 is the Least Significant Bit. The jumpers have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32. Turn off the switches and add the values of the switches to obtain the correct memory address. (On=1, 0ff=0)