IMP8 IO card Settings and Configuration
ALLOY COMPUTER PRODUCTS, INC.
IMP8
Card Type | I/O controller |
Chip Set | None |
Maximum Onboard Memory | Unidentified |
I/O Options | Terminal connector |
Data Bus | 16-bit ISA |
Floppy drives supported | None |
CONNECTIONS | |
Function | Label |
37-pin connector | CN1 |
Note: CN1 is used to connect the IMP8 & the Terminal Array Panel together for Alloy’s NX386 operating system. The Terminal Array Panel contains eight terminal connectors (DB-9) & eight parallel/serial connectors (DB-25). | |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | First IMP8 board installed | JP1 | Closed |
Second IMP8 board installed | JP1 | Open | |
Note: Only remove the jumper from JP1 on the second board installed in any system. | |||
MISCELLANEOUS TECHNICAL NOTE |
Note: The exact type & amount of memory is unidentified. |
My Books
