FTFA/P IO card Settings and Configuration

Card Type	Floppy drive controller card, tape drive controller card
Floppy drives supported	Two 360KB
Tape drives supported	One APT25, APT40, APT40/Q, Retriever/40, Retriever/60, FT-60, Retriever/120 or Retriever/60E
Data Bus	8-bit ISA
Card Size	Full-length, full-height card

CONNECTIONS
Function	Location	Function	Location
34-pin drive interface - internal	J2	34-pin drive interface - external	J4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	250/500KBS speed	SW1/1	On
	250KBS speed	SW1/1	Off
»	Factory configured - do not alter	SW1/8	On

DMA CHANNEL SELECTION
Channel		JP2/A	JP2/B	JP2/C	JP3/A	JP3/B	JP3/C
	1	Open	Open	Closed	Open	Open	Closed
»	2	Open	Closed	Open	Open	Closed	Open
	3	Closed	Open	Open	Closed	Open	Open

BASE PORT ADDRESS SELECTION
Setting		SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7
	210h	On	On	On	On	Off	On
	310h	Off	On	On	On	Off	On
	338h	Off	On	On	Off	Off	Off
»	340h	Off	On	Off	On	On	On
	3F0h	Off	Off	Off	Off	Off	On

DMA ADDRESS SELECTION
Address	JP2	JP3
1	Pins 5 & 6 closed	Pins 5 & 6 closed
2	Pins 3 7 4 closed	Pins 3 & 4 closed
3	Pins 1 & 2 closed	Pins 1 & 2 closed

INTERRUPT SELECTION
IRQ	JP1
2	Pins 5 & 6 closed
4	Pins 3 & 4 closed
6	Pins 1 & 2 closed