PCL-730 IO card Settings and Configuration

ADVANTECH CO., LTD

PCL-730

Card Type
Digital I/O card
Chip Set
Unidentified
Maximum Onboard Memory
Unidentified
I/O Options
Input channel connectors (2), output channel connectors (2), 37-pin input/output connector
Hard Drives supported
None
Floppy drives supported
None
Data Bus
8-bit ISA
Card Size
Half-length, half-height card

CONNECTIONS
Function
Label
Function
Label
20-pin isolated output connector
CN1
20-pin digital input connector
CN4
20-pin isolated input connector
CN2
Isolated output ground terminal
CN5
20-pin digital output connector
CN3
37-pin input/output connector
CN6

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
Interrupt triggered on rising edge
JP2
Pins 1 & 3 closed

Interrupt triggered on falling edge
JP2
Pins 2 & 4 closed

VERSION SELECTION
Setting
JP4
JP5
A1
Pins 1 & 2, 4 & 5 closed
Pins 1 & 2, 4 & 5 closed
B2
Pins 2 & 3, 5 & 6 closed
Pins 2 & 3, 5 & 6 closed
Note: These jumpers control the pin assignments for CN1, CN2, and CN6.

INERRUPT SOURCE SELECTION
Channel
JP3/A
JP3/B
JP3/C
JP3/D
Isolated DI channel 0
Closed
Open
Open
Open
Isolated DI channel 1
Open
Closed
Open
Open
TTL DI channel 0
Open
Open
Closed
Open
TTL DI channel 1
Open
Open
Open
Closed

BASE I/O ADDRESS SELECTION
Setting
SW1/1
SW1/2
SW1/3
SW1/4
SW1/5
SW1/6
SW1/7
SW1/8

200h
Off
On
On
On
On
On
On
On

204h
Off
On
On
On
On
On
On
Off

208h
Off
On
On
On
On
On
Off
On

20Ch
Off
On
On
On
On
On
Off
Off

210h
Off
On
On
On
On
Off
On
On
»
300h
Off
Off
On
On
On
On
On
On

3E0h
Off
Off
Off
Off
Off
On
On
On

3E4h
Off
Off
Off
Off
Off
On
On
Off

3E8h
Off
Off
Off
Off
Off
On
Off
On

3ECh
Off
Off
Off
Off
Off
On
Off
Off

3FOh
Off
Off
Off
Off
Off
Off
On
On
Note:
A total of 125 valid base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Least Significant Bit and switch SW1/1 is the Most Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0)

IRQ INTERRUPT SELECTION
IRQ
JP1/A
JP1/B
JP1/C
JP1/D
JP1/E
JP1/F
JP1/G

IRQ2
Closed
Open
Open
Open
Open
Open
Open

IRQ3
Open
Closed
Open
Open
Open
Open
Open

IRQ4
Open
Open
Closed
Open
Open
Open
Open

IRQ5
Open
Open
Open
Closed
Open
Open
Open

IRQ6
Open
Open
Open
Open
Closed
Open
Open

IRQ7
Open
Open
Open
Open
Open
Closed
Open
»
Disabled
Open
Open
Open
Open
Open
Open
Closed

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

PCL-730 IO card Settings and Configuration

Search

My Books

Discover

Card Type	Digital I/O card
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Input channel connectors (2), output channel connectors (2), 37-pin input/output connector
Hard Drives supported	None
Floppy drives supported	None
Data Bus	8-bit ISA
Card Size	Half-length, half-height card

CONNECTIONS
Function	Label	Function	Label
20-pin isolated output connector	CN1	20-pin digital input connector	CN4
20-pin isolated input connector	CN2	Isolated output ground terminal	CN5
20-pin digital output connector	CN3	37-pin input/output connector	CN6

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Interrupt triggered on rising edge	JP2	Pins 1 & 3 closed
	Interrupt triggered on falling edge	JP2	Pins 2 & 4 closed

VERSION SELECTION
Setting	JP4	JP5
A1	Pins 1 & 2, 4 & 5 closed	Pins 1 & 2, 4 & 5 closed
B2	Pins 2 & 3, 5 & 6 closed	Pins 2 & 3, 5 & 6 closed
Note: These jumpers control the pin assignments for CN1, CN2, and CN6.

INERRUPT SOURCE SELECTION
Channel	JP3/A	JP3/B	JP3/C	JP3/D
Isolated DI channel 0	Closed	Open	Open	Open
Isolated DI channel 1	Open	Closed	Open	Open
TTL DI channel 0	Open	Open	Closed	Open
TTL DI channel 1	Open	Open	Open	Closed

BASE I/O ADDRESS SELECTION
Setting		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8
	200h	Off	On	On	On	On	On	On	On
	204h	Off	On	On	On	On	On	On	Off
	208h	Off	On	On	On	On	On	Off	On
	20Ch	Off	On	On	On	On	On	Off	Off
	210h	Off	On	On	On	On	Off	On	On
»	300h	Off	Off	On	On	On	On	On	On
	3E0h	Off	Off	Off	Off	Off	On	On	On
	3E4h	Off	Off	Off	Off	Off	On	On	Off
	3E8h	Off	Off	Off	Off	Off	On	Off	On
	3ECh	Off	Off	Off	Off	Off	On	Off	Off
	3FOh	Off	Off	Off	Off	Off	Off	On	On
Note: A total of 125 valid base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/8 is the Least Significant Bit and switch SW1/1 is the Most Significant Bit. The switches have the following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, SW1/4=64, SW1/5=32, SW1/6=16, SW1/7=8, SW1/8=4. Turn off the switches and add the values of the switches to obtain the correct memory address. (Off=1, On=0)

IRQ INTERRUPT SELECTION
IRQ		JP1/A	JP1/B	JP1/C	JP1/D	JP1/E	JP1/F	JP1/G
	IRQ2	Closed	Open	Open	Open	Open	Open	Open
	IRQ3	Open	Closed	Open	Open	Open	Open	Open
	IRQ4	Open	Open	Closed	Open	Open	Open	Open
	IRQ5	Open	Open	Open	Closed	Open	Open	Open
	IRQ6	Open	Open	Open	Open	Closed	Open	Open
	IRQ7	Open	Open	Open	Open	Open	Closed	Open
»	Disabled	Open	Open	Open	Open	Open	Open	Closed