PA-MA12(-H) IO card Settings and Configuration
ACQUTEK CORPORATION
PA-MA12(-H)
Card Type | Data Acquisition |
Chip Set | Unidentified |
Maximum Onboard Memory | Unidentified |
I/O Options | Analog input, digital input, digital I/O connectors (3) |
Data Bus | 16-bit ISA |
Card Size | Full-length |
CONNECTIONS | |||
Function | Label | Function | Label |
XDI expansion board connector | CN1 | A/D converter CMRR selector | VR1 |
XDI expansion board connector | CN2 | A/D converter offset selector | VR2 |
XDI expansion board connector | CN3 | A/D converter range selector | VR3 |
37-pin analog/digital signals connector | CN4 | D/A converter range selector | VR4 |
Timer signal input (8254) | JP1 | D/A converter offset selector | VR5 |
External clock input | JP10 |
|
|
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
Differential A/D input | JP9 | Pins 1 & 2, 4 & 5 closed |
Single ended A/D input | JP9 | Pins 2 & 3, 5 & 6 closed |
TESTING JUMPER SETTINGS | |||
Function | Label | Position | |
» | Factory configured - do not alter | JP2 | Pins 1 & 2, 3 & 4 closed |
» | Factory configured - do not alter | JP11 | Pins 1 & 2 closed |
» | Factory configured - do not alter | TP1 | Pins 1 & 2 closed |
» | Factory configured - do not alter | TP2 | Pins 1 & 2 closed |
» | Factory configured - do not alter | TP3 | Pins 1 & 2 closed |
» | Factory configured - do not alter | TP4 | Pins 1 & 2 closed |
» | Factory configured - do not alter | TP5 | Pins 1 & 2 closed |
DATA TRANSFER SELECTION | ||||
Data length | JP4/A | JP4/B | JP4/C | |
» | Automatic Word/Byte data transfer enabled | Open | Closed | Open |
| Byte data transfer for A/D data (8 bits) | Closed | Open | Open |
| Word data transfer for A/D data ( 16 bits) | Open | Open | Closed |
DMA CHANNEL SELECTION | |||||||
Channel | JP12/A | JP12/B-C | JP12/D-E | JP12/F-G | JP12/H-I | JP12/J-K | JP12/L-M |
0 | Open | Open | Open | Open | Open | Open | Closed |
1 | Open | Open | Open | Open | Open | Closed | Open |
3 | Open | Open | Open | Open | Closed | Open | Open |
5 | Closed | Open | Open | Closed | Open | Open | Open |
6 | Closed | Open | Closed | Open | Open | Open | Open |
7 | Closed | Closed | Open | Open | Open | Open | Open |
Note: Channels 0,5,6, & 7 are not available for PC & PC-XT. | |||||||
D/A OUTPUT VOLTAGE RANGE SELECTION | |||||
Voltage | JP13/A | JP13/B | JP13/C | JP13/D | |
» | 0V to 5V | Open | Closed | Open | Open |
| 0V to 10V | Open | Open | Closed | Open |
| -5V to 5V | Open | Closed | Open | Closed |
| -10V to 10V | Open | Open | Closed | Closed |
A/D INPUT VOLTAGE RANGE SELECTION | |||
Function | Label | Position | |
» | 5V A/D input | JP5 | Pins 2 & 3 closed |
| 10V A/D input | JP5 | Pins 1 & 2 closed |
» | Bipolar A/D input | JP6 | Pins 1 & 2, 4 & 5 closed |
| Unipolar A/D input | JP6 | Pins 2 & 3, 5 & 6 closed |
A/D INPUT GAIN SELECTION | ||
Gain | JP8 | |
| Not installed | Open |
» | 1 | Pins 9 & 11 closed |
| 2 | Pins 11 & 12 closed |
| 5 | Pins 9 & 10 closed |
| 10 | Pins 7 & 8 closed |
| 20 | Pins 5 & 6 closed |
| 50 | Pins 3 & 4 closed |
| User defined | Pins 1 & 2 closed |
BASE I/O ADDRESS SELECTION | |||||||||
Setting | JP7/A | JP7/B | JP7/C | JP7/D | JP7/E | JP7/F | JP7/G | JP7/H | |
| 000h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed |
| 010h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open |
| 020h | Closed | Closed | Closed | Closed | Closed | Closed | Open | Closed |
| 030h | Closed | Closed | Closed | Closed | Closed | Closed | Open | Open |
| 040h | Closed | Closed | Closed | Closed | Closed | Open | Closed | Closed |
» | 2E0h | Closed | Closed | Open | Closed | Open | Open | Open | Closed |
| FB0h | Open | Open | Open | Open | Open | Closed | Open | Open |
| FC0h | Open | Open | Open | Open | Open | Open | Closed | Closed |
| FD0h | Open | Open | Open | Open | Open | Open | Closed | Open |
| FE0h | Open | Open | Open | Open | Open | Open | Open | Closed |
| FF0h | Open | Open | Open | Open | Open | Open | Open | Open |
Note: A total of 256 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. JP7/A is the Most Significant Bit and switch JP7/H is the Least Significant Bit. The switches have the following decimal values: JP7/A=2048, JP7/B=1024, JP7/C=512, JP7/D=256, JP7/E=128, JP7/F=64, JP7/G=32, JP7/H=16. Turn off the switches and add the values of the switches to obtain the correct memory address. (Open=1, Closed=0) | |||||||||
IRQ INTERRUPT SELECTION | ||||||
IRQ | JP3/A | JP3/B | JP3/C | JP3/D | JP3/E | |
| IRQ2 | Open | Open | Open | Open | Pins 1 & 2 |
| IRQ3 | Open | Open | Open | Pins 1 & 2 | Open |
| IRQ4 | Open | Open | Pins 1 & 2 | Open | Open |
» | IRQ5 | Open | Pins 1 & 2 | Open | Open | Open |
| IRQ7 | Pins 1 & 2 | Open | Open | Open | Open |
| IRQ10 | Open | Open | Open | Open | Pins 2& 3 |
| IRQ11 | Open | Open | Open | Pins 2& 3 | Open |
| IRQ12 | Open | Open | Pins 2& 3 | Open | Open |
| IRQ14 | Open | Pins 2 & 3 | Open | Open | Open |
| IRQ15 | Pins 2 & 3 | Open | Open | Open | Open |
| Disabled | Open | Open | Open | Open | Open |
Note: Pins designated are in the closed position. IRQ10, IRQ11, IRQ12, IRQ14 & IRQ15 are for AT compatible buses; PC buses will not support them. | ||||||
My Books
