S T 3 2 5 3 2 A M E D A L I . 2 5 3 2 SEAGATE
Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders | 4956| 619| 1024
Capacity form/unform 2557/ MB Heads 6| 16| | 16
Seek time / track 13.0/ 3.0 ms Sector/track | 63| 63| 63
Controller IDE / ATA3 ULTRA Precompensation
Cache/Buffer 128 KB Landing Zone
Data transfer rate 10.000 MB/S int Bytes/Sector 512
33.300 MB/S ext UDMA
Recording method RLL 1/7,ZBR 2/3 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C |
Power: sleep W Humidity % |
standby 1.0 W Altitude km |
idle 4.8 W Shock g 5 | 75
seek 6.6 W Rotation RPM 4500
read/write W Acoustic dBA
spin-up W ECC Bit
MTBF h 300000
Warranty Month
Lift/Lock/Park YES Certificates
SEAGATE ST32532A JUMPER SETTING
+---------------------------------------------------------+ | |XX | |XXI | |XXN | |XXT | |XXE | |XXR | |XXF | |XXA | |XXC | 1XXE | |+-+ | || |Jumper | |+-+1 | +-+ |XX Power | +-+ |XX +---------------------------------------------------------+ 12V
SEAGATE ST32532A JUMPER SETTING
REAR VIEW
J2 40 pin I/O Cable Connection
| pin-20 removed
|
+----------+---------+-----1-+---------+ TOP
HDA -+::::::::::*::::::::1| : : : | 0 0 0 0 +--
+--------------------+-+-+-+-+-5-G-G-12+ BOTTOM
| | |
Master ON, Slave OFF --+ | |
Slave Present (when Master ON) ----+ |
Cable Select (when Slave OFF) ----+ |
Reserved ------+
o o1
o o2
| |
Limit capacity to 2.1 Gbytes ---+ |
(4092 cylinders) |
Full capacity (as shipped) -----+
Limit Capacity jumper sets the default cylinder translation to 4092
to solve issues with certain BIOS that only auto-detect.
Total available sectors are still at full capacity as reported via
Identify Drive data words 52 - 61. Third party partitioning software
may be needed to achieve full capacity if this option jumper is used.