Hard Drive: MAXTOR: 91190D7 DIAMOND MAX 11900MB 3.5"/SL ATA4 ULTRA

9 1 1 9 0 D 7     D I A M O N D   M A X    MAXTOR
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        |     |     |
Capacity form/unform 11900/      MB        Heads           7|     |     |
Seek time   / track   9.0/ 0.9 ms          Sector/track     |     |     |
Controller           IDE / ATA4 ULTRA      Precompensation
Cache/Buffer           256 KB SDRAM        Landing Zone
Data transfer rate   18.600 MB/S int       Bytes/Sector      512
                     33.000 MB/S ext
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 71
Power: sleep              W     Humidity     %         5 95    |      5 95
       standby        0.9 W     Altitude    km    -0.061  3.048| -0.061 12.192
       idle           4.4 W     Shock        g        20       |    200
       seek           9.6 W     Rotation   RPM      5400
       read/write     4.8 W     Acoustic   dBA        36
       spin-up       20.2 W     ECC        Bit
                                MTBF         h     500000
                                Warranty Month        36
Lift/Lock/Park     YES          Certificates                                  

Layout

MAXTOR DIAMOND MAX 3400

                     Pin 1
     J1 IDE Connector  |                J2 Power
  +----------- --------+-++-----------++---------+
  | .................... || @ * *   * || X X X X |
  | .......... ......... || @ * * * * || X X X X |
  +----------------------++-+-+-+-+-+-++-+-+-+-+-+
                            | | | | |    | | | |
                            | | | | |    | | | |
      J50 Master/Slave -----+ | | | |    | | | +-+12V
      J48 Cable Select -------+ | | |    | | +---+12V Return
      J46 4092 Cyl Limitation---+ | |    | +----- +5V Return
      J44 Factory Reserved -------+ |    +------- +5V
      J42 Factory Reserved ---------+

Jumpers

MAXTOR DIAMOND MAX INSTALLATION SHEET

Jumper Setting
==============

                                        +---+---+---+---+---+
                                        |J50|J48|J46|J44|J42|
  +-------------------------------------+---+---+---+---+---+
  | Master/Slave                        |   |   |   |   |   |
  |  Only Drive in single drive system* | J |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Master in a dual drive system*     | J |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Slave in a dual drive system       | O |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  | Cable Select                        |   |   |   |   |   |
  |  Disabled*                          |   | O |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Enabled                            |   | J |   |   |   |
  +-------------------------------------+---+---+---+---+---+
    J=Jumpered O=Open *=Default

Install

MAXTOR 91360D8/91190D7/91020D6/90845D5/90680D4/90510D3/90340D2

Notes on installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

The drive will operate in all axis (6 directions).

Idle
The drive is spinning., the actuator is parked and powered
off, and all other circuitry is powered on. The drive is
capable of responding to read commands within 40 ms.

Read/Write
Data is being read from or written to the drive.

Spin-up
The drive is spinning up following initial application
of power and has yet not reached full speed. Maximum
current draw lasts one second.

Standby
The spin motor is not spinning. The drive will leave this
mode upon receipt of a command that requires disk access.
The time-out value for this mode is programmable. The
buffer is active to accept write data.

Sleep
This is the lowest power state - with the interface set to
inactive. A software or hardware reset is required to return
the drive to the standby state.