Hard Drive: IBM: DTCA-24080 TRAVEL4GT 4080MB 3.5"/SL ATA3 FAST

D T C A - 2 4 0 8 0   T R A V E L 4 G T    IBM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        |     |     |
Capacity form/unform  4080/      MB        Heads            |     |     |
Seek time   / track  13.0/     ms          Sector/track     |     |     |
Controller           IDE / ATA3 FAST       Precompensation
Cache/Buffer           512 KB              Landing Zone
Data transfer rate    9.000 MB/S int       Bytes/Sector      512
                     33.300 MB/S ext
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage                  Temperature *C                 |
Power: sleep              W     Humidity     %                 |
       standby            W     Altitude    km                 |
       idle               W     Shock        g       100       |    600
       seek               W     Rotation   RPM      4000
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit
                                MTBF         h
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

IBM DTCA-23240/24090 TRAVELSTAR 4GT

              +--------------------------------------+
              |                                      |
              |                                      |
              |                                      |
              +--------Interface-------------49------+
              |       **********************1 **47 Jumper
              |       *************x********* **48   |
              +------44----------------------50------+
              +                                      +

Pin position 20 is left blank for secure connector insertion.

Jumpers

IBM DTCA-23240/24090 JUMPER SEWTTING

Jumper Setting
==============

Drive Address Setting
---------------------
A jumper is available at the interface connector to determine the
drive address.

Using Cable Selection, the drive address depends on the condition of
pin 28 of the AT interface cable. In the case when pin 28 is ground
or low, the drive is a Master. If pin 28 is open or high level, the
drive is a Slave.