Hard Drive: IBM: DHEA-34330 DESKSTAR5 4330MB 3.5"/SL ATA3

D H E A - 3 4 3 3 0   D E S K S T A R 5    IBM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders        | 8400| 8400|
Capacity form/unform  4330/      MB        Heads           5|   16|   15|
Seek time   / track      /     ms          Sector/track     |   63|   63|
Controller           IDE / ATA3            Precompensation
Cache/Buffer           476 KB ADAPTIVE     Landing Zone
Data transfer rate          MB/S int       Bytes/Sector      512
                     33.300 MB/S ext UDMA
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 65
Power: sleep              W     Humidity     %         8 90    |      5 95
       standby            W     Altitude    km    -0.300  3.048| -0.300 12.000
       idle               W     Shock        g        10       |     75
       seek               W     Rotation   RPM
       read/write         W     Acoustic   dBA
       spin-up            W     ECC        Bit   ON THE FLY,SMART
                                MTBF         h
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

Layout

IBM DHEA-34300/36480 JUMPER SETTING

   +---------------------------------------------------------------+
   |                                                               |
   |                                                               |
   | +--------------------------------------1---G-----A-+------1-+ |
   | |* * * * * * * * * * * * * * * * * * * * * * * * * |X X X X | |
   | |* * * * * * * * *   * * * * * * * * * *+-+* * * * |X X X X | |
   +-+------AT-INTERFACE---------------------+ +-JUMPER-+-POWER--+-+

Jumpers

IBM DHEA-34300/36480 JUMPER SETTING

 Jumper Setting
 ==============
   +---------------------------------------------------------------+
   |                                                               |
   |                                                               |
   | +--------------------------------------1---G-E-C-A-+------1-+ |
   | |* * * * * * * * * * * * * * * * * * * * * * * * * |X X X X | |
   | |* * * * * * * * *   * * * * * * * * * *+-+* * * * |X X X X | |
   +-+------AT-INTERFACE---------------------+ +H-F-D-B-+-POWER--+-+
                                                Jumper

Interface Connector 3M 3417-7000 or equivalent

16 Logical Head 15 Logical Head
--------------- ---------------
G E C A G E C A
X * * X Device 0 X * xxx
X * * X (Master) X * * *
H F D B H F D B

G E C A G E C A
* * X X Device 1 * * xxx
* * X X (Slave) * * * *
H F D B H F D B

G E C A G E C A
* X * X Cable Select * X xxx
* X * X * X * *
H F D B H F D B

G E C A G E C A
X * * X Device 1 X X * *
X * * X (Slave) X X * *
H F D B Present H F D B

All other jumper setting patterns are reserved. Do not make other
settings.

Shipping default settings:
16 head logical architecture is enabled. Master is set to on (i.e.
jumper on pins A-B and G-H. No other jumpers are fitted.

Install

IBM DHEA-XXXX DESKSTAR 8

Notes on installation
=====================

Installation direction
----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

The drive will operate in all axis (6 directions).

Mount the drive securely, using the appropriate brackets or rails, in
any axis, using four 6-32 UNC metric screws in either bottom or side
mounting holes.

The max. screew insertion depth for th ebottom mounting is 5.5mm
(0.21 inch) and for side mounting 3.5 mm (0.14 inch).