TP-510 Hard Disk/Floppy Controller Settings and Configuration
TRIPACE EUROPE B. V.
TP-510
Card Type | SCSI Host Adapter |
Chip Set | Tripace |
Maximum Onboard Memory | Unidentified |
I/O Options | SCSI connector (2) |
Hard Drives supported | Up to 7 SCSI-2 devices |
Floppy drives supported | None |
Data Bus | 16-bit ISA |
Card Size | Three-quarter length, half-height card |
CONNECTIONS | |||
Function | Label | Function | Label |
Fuse | F1 | SCSI connector - external | P2 |
50-pin SCSI connector - internal | P1 | ||
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | 140h base address enabled | J1 | Open |
| 340h base address enabled | J1 | Closed | |
SCSI TERMINATION | |||
Setting | RP1 | RP2 | RP3 |
SCSI bus terminated | Installed | Installed | Installed |
SCSI bus not terminated | Removed | Removed | Removed |
INTERRUPT SELECTION | ||
IRQ | J3 | J4 |
IRQ9 | Pins 1 & 3 closed | Open |
IRQ10 | Pins 2 & 4 closed | Open |
IRQ11 | Open | Pins 1 & 3 closed |
IRQ12 | Open | Pins 2 & 4 closed |
My Books
