T100 Hard Disk/Floppy Controller Settings and Configuration
TRANTOR SYSTEMS, LTD.
T100
Data bus: 8-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Up to seven SCSI devices
Floppy drives supported: None
CONNECTIONS | |
Function | Location |
50-pin SCSI connector-internal | CN1 |
50-pin SCSI connector-external | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | SCSI parity check enabled | SW1/switch 3 | off |
SCSI parity check disabled | SW1/switch 3 | on | |
| » | BIOS enabled | SW1/switch 6 | off |
BIOS disabled | SW1/switch 6 | on | |
I/O PORT ADDRESS | ||
Address | SW1/switch 1 | SW1/switch 2 |
320h | off | off |
324h | off | on |
328h | on | off |
32Ch | on | on |
BIOS ADDRESS | ||
Address | SW1/switch 4 | SW1/switch 5 |
C8000h | off | off |
CA000h | on | off |
CC000h | off | on |
CE000h | on | on |
DMA CHANNEL | ||
DRQ | JP1 | Position |
DRQ1 | pins 7 & 9 and 8 & 10 only | closed |
DRQ3 | pins 9 & 11 and 10 & 12 only | closed |
Disabled | pins 7 through 12 | open |
INTERRUPT REQUEST | ||
IRQ | JP1 | Position |
IRQ3 | pins 2 & 4 only | closed |
IRQ5 | pins 1 & 3 only | closed |
IRQ6 | pins 4 & 5 only | closed |
IRQ7 | pins 3 & 5 only | closed |
Disabled | pins 1 through 6 | open |
MISCELLANEOUS TECHNICAL NOTES |
This controller contains no on-board software. |
My Books
