SPI 200 Hard Disk/Floppy Controller Settings and Configuration

CONNECTIONS
Function	Location
50-pin SCSI connector-internal	CN2
50-pin SCSI connector-external	CN3
34-pin control cable connector-floppy drive	CN4
4-pin connector-LED Drive Active	CN5

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Zero Wait State enabled	JP1/jumper 1	closed
	Zero Wait State disabled	JP1/jumper 1	open
»	Factory configured - do not alter	JP1/jumper 2	open
»	Floppy drive enabled	JP1/jumper 3	closed
	Floppy drive disabled	JP1/jumper 3	open

BIOS ADDRESS
Address		JP1/jumper 4	JP1/jumper 5	JP1/jumper 6
»	D800h	closed	open	closed
	Disabled	open	open	open
	C800h	closed	closed	closed
	CC00h	open	closed	closed
	DC00h	open	open	closed

I/O PORT ADDRESS
Address		JP1/jumper 7	JP1/jumper 8	JP1/jumper 9	JP1/jumper 10
	Disabled	N/A	N/A	N/A	open
	300h	closed	closed	closed	closed
»	310h	open	closed	closed	closed
	320h	closed	open	closed	closed
	330h	open	open	closed	closed
	340h	closed	closed	open	closed
	350h	open	closed	open	closed
	360h	closed	open	open	closed
	370h	open	open	open	closed

INTERRUPT REQUEST JUMPERS - JP2
IRQ		J1	J2	J3	J4	J5	J6	J7	J8
	Disabled	open	open	open	open	open	open	open	open
	IRQ3	closed	open	open	open	open	open	open	open
	IRQ4	open	closed	open	open	open	open	open	open
	IRQ5	open	open	closed	open	open	open	open	open
	IRQ10	open	open	open	closed	open	open	open	open
	IRQ11	open	open	open	open	closed	open	open	open
	IRQ12	open	open	open	open	open	closed	open	open
»	IRQ14	open	open	open	open	open	open	closed	open
	IRQ15	open	open	open	open	open	open	open	closed