SDC1611 Hard Disk/Floppy Controller Settings and Configuration
STORAGE DIMENSIONS
SDC1611
Card Type | Hard drive controller card |
Hard Drives supported | Up to 7 SCSI devices |
Floppy drives supported | None |
Data Bus | 16-bit ISA |
Card Size | Full-length, full-height card |
CONNECTIONS | |||
Function | Location | Function | Location |
50-pin SCSI connector - internal | CN1 | 50-pin SCSI connector - external | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Factory configured - do not alter | JP1 | Reserved |
| » | Factory configured - do not alter | JP2 | Reserved |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On/blinking | SCSI channel active |
LED1 | Unidentified | Off | SCSI channel not active |
MISCELLANEOUS TECHNICAL NOTES |
RS1 & RS2 are terminating resisters. Only remove terminators in internal SCSI & external SCSI devices are attached. |
My Books
