LANSTOR PCI RAIDCARD Hard Disk/Floppy Controller Settings and Configuration

Card Type	Hard drive controller
Processor	Intel i960CA
Chipset:	Unidentified
Maximum On Board Memory	32MB
Hard Drives Supported	Up to 14 SCSI-2 Wide,Fast devices
Floppy Drives Supported	None
Data Bus	32-bit PCI
Card Size	Full length, full height
Raid Levels Supported	0,1,3,5,6,7

CONNECTIONS
Function	Location	Function	Location
68-pin SCSI Wide/Fast connector channel 0 - external	CN1	68-pin SCSI Wide/Fast connector channel 1 - internal	CN4
68-pin SCSI Wide/Fast connector channel 1 - external	CN2	Unidentified	J1
68-pin SCSI Wide/Fast connector channel 0 - internal	CN3	Unidentified	J2

TERMINATION POWER SELECTION FOR CHANNEL 0
Setting	JP4
Enabled	Closed
Disabled	Open

TERMINATION POWER SELECTION FOR CHANNEL 1
Setting	JP6
Enabled	Closed
Disabled	Open

DRAM CONFIGURATION
Size	Bank 0
4MB	(1) 1M x 36
8MB	(1) 2M x 36
16MB	(1) 4M x 36
32MB	(1) 8M x 36

STATUS LED(S)
JP6	Color	Status	Condition
Pins 1 & 2	Unidentified	On	One or more SCSI channels is transmitting or receiving data.
Pins 3 & 4	Unidentified	On	The controller is transmitting or receiving data to or from the host system.
Pins 5 & 6	Unidentified	On	The memory on the controller holds data that is more current than the data in the hard drive.
Note:JP6 provides connection for 3 status LED. Location of pin 1 is unidentified.