ADP50L Hard Disk/Floppy Controller Settings and Configuration
SILICON VALLEY COMPUTER, INC.
ADP50L
Q1 /93 |
Data bus: 8-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE (AT) Interface drives
Floppy drives supported: None
CONNECTIONS | |
Function | Location |
40-pin AT Interface (IDE) connector | C1 |
5-pin connector-DC power | C2 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Factory configured - do not alter | J4 | open |
| » | Factory configured - do not alter | J5 | open |
| » | Factory configured - do not alter | J6 | open |
| » | Uses 2764 or 27C64 ROM Chip | J7 | open |
Uses 27256 or 27C256 ROM Chip | J7 | closed | |
BIOS ADDRESS | ||||
Address | Jumper J1 | Jumper J2 | Jumper J3 | |
Disabled | N/A | N/A | ||
| » | C800 | open | open | closed |
CA00 | closed | open | closed | |
CC00 | open | closed | closed | |
CE00 | closed | closed | closed | |
My Books
