KT-IDE PLUS Hard Disk/Floppy Controller Settings and Configuration
KENTECH COMPUTER(HK), LTD.
KT-IDE PLUS
Data Bus | 16-bit ISA |
Card Size | Half-length, half-height card |
Hard Drives supported | Two IDE (AT) drives |
Floppy drives supported | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |||
Function | Location | Function | Location |
40-pin IDE(AT) connector | JP1 | 34-pin cable connector - floppy drive | JP5 |
16-pin game port | JP2 | 2-pin connector - drive active LED | JP8 |
10-pin serial port 1 - internal | JP3 | 25-pin parallel port - external | JP12 |
10-pin serial port 2 - internal | JP4 |
|
|
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Floppy drive order is normal (A:, B) | JP6/1 | Pins 1 & 2 closed |
Floppy drive order is reversed (B:, A) | JP6/1 | Pins 2 & 3 closed | |
| » | Floppy primary address is 3F0h | JP6/2 | Pins 2 & 3 closed |
Floppy secondary address is 370h | JP6/2 | Pins 1 & 2 closed | |
| » | IDE(AT) interface enabled | JP6/3 | Pins 1 & 2 closed |
IDE(AT) interface enabled | JP6/3 | Pins 2 & 3 closed | |
| » | IDE primary address is 1F0h | JP6/4 | Pins 2 & 3 closed |
IDE secondary address is 170h | JP6/4 | Pins 1 & 2 closed | |
| » | Floppy interface enabled | JP6/5 | Pins 1 & 2 closed |
Floppy interface disabled | JP6/5 | Pins 2 & 3 closed | |
| » | Parallel port is standard | JP11 | Closed |
P Parallel port is bi-directional | JP11 | Open | |
PARALLEL PORT ADDRESS SELECTION | |||
Setting | JP9/5 | JP9/6 | |
| » | LPT1 (378h) | Pins 2 & 3 closed | Pins 1 & 2 closed |
LPT2 (278h) | Pins 1 & 2 closed | Pins 2 & 3 closed | |
LPT3 (3BCh) | Pins 1 & 2 closed | Pins 1 & 2 closed | |
Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | |
SERIAL PORT 1 ADDRESS SELECTION | |||
Setting | JP9/1 | JP9/2 | |
| » | COM1 (3F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
COM3 (3E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed | |
COM4 (2E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed | |
Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | |
SERIAL PORT 2 ADDRESS SELECTION | |||
Setting | JP9/3 | JP9/4 | |
| » | COM2 (2F8h) | Pins 1 & 2 closed | Pins 2 & 3 closed |
COM3 (3E8h) | Pins 1 & 2 closed | Pins 1 & 2 closed | |
COM4 (2E8h) | Pins 2 & 3 closed | Pins 1 & 2 closed | |
Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | |
PARALLEL PORT IRQ SELECTION | |||
Setting | JP12/7 | JP12/8 | |
IRQ5 | Open | Closed | |
| » | IRQ7 | Closed | Open |
SERIAL PORT 1 IRQ SELECTION | ||||
Setting | JP12/1 | JP12/2 | JP12/3 | |
| » | 4 | Closed | Open | Open |
3 | Open | Closed | Open | |
5 | Open | Open | Closed | |
SERIAL PORT 2 ADDRESS SELECTION | ||||
Setting | JP12/4 | JP12/5 | JP12/6 | |
| » | 3 | Closed | Open | Open |
4 | Open | Closed | Open | |
5 | Open | Open | Closed | |
My Books
