VESA SUPER I/O Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit, VL-bus
Size:	Three-quarter length, half-height card
Hard drive supported:	Two IDE (AT) interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	J1
40-pin IDE (AT) Interface connector	J2
Game port	J3
10-pin serial port 2	J4
10-pin serial port 1	J5
34-pin control cable connector - floppy drive	J6
25-pin parallel port	J7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Base IDE I/O address is 1F0h (primary)	JP1	pins 1 & 2 closed
	Base IDE I/O address is 170h (secondary)	JP1	pins 2 & 3 closed
»	Game port enabled	JP11	pins 1 & 2 closed
	Game port disabled	JP11	pins 2 & 3 closed
»	Floppy drive enabled	JP12	pins 1 & 2 closed
	Floppy drive disabled	JP12	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT/Address		JP5	JP10
»	LPT2/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT3/278h	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed

HARD DRIVE SPEED
Speed		JP2	JP3	JP4
»	4	pins 1 & 2 closed	pins 2 & 3 closed	pins 2 & 3 closed
	0	pins 2 & 3 closed	pins 2 & 3 closed	pins 2 & 3 closed
	1	pins 2 & 3 closed	pins 2 & 3 closed	pins 1 & 2 closed
	2	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed
	3	pins 2 & 3 closed	pins 1 & 2 closed	pins 1 & 2 closed
	5	pins 1 & 2 closed	pins 2 & 3 closed	pins 1 & 2 closed
	6	pins 1 & 2 closed	pins 1 & 2 closed	pins 2 & 3 closed
	7	pins 1 & 2 closed	pins 1 & 2 closed	pins 1 & 2 closed

SERIAL PORT 1 CONFIGURATION
COM/Address		JP7	JP8
»	COM1/3F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM3/3E8h	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM/Address		JP6	JP9
»	COM2/2F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM4/2E8h	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	N/A	pins 2 & 3 closed