IT-PACK4VL VER.1.0 Hard Disk/Floppy Controller Settings and Configuration
INFORMTECH INTERNATIONAL, INC.
IT-PACK4VL VER.1.0
Data bus: | 32-bit, VL-bus |
Size: | Three/quarter-length, full-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB or 1.44MB drives |
CONNECTIONS | |
Function | Location |
34-pin control cable connector - floppy drive | J1 |
40-pin IDE(AT) Interface connector | J2 |
10-pin serial port 1 - internal | JP3 |
10-pin serial port 2 - internal | JP4 |
4-pin connector - drive active LED | JP7 |
25-pin parallel port - external | CN1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Parallel port is bi-directional | JP1 | Open |
Parallel port is output only | JP1 | Closed | |
| » | Floppy controller enabled | JP2 | pins 19 & 20 closed |
Floppy controller disabled | JP2 | pins 20 & 21 closed | |
SERIAL PORT 1 CONFIGURATION | ||
COM/Address | JP2 | |
| » | COM1/3F8h | pins 1 & 2, 5 & 6 closed |
COM3/3E8h | pins 2 & 3, 4 & 5 closed | |
Disabled | pins 2 & 3, 5 & 6 closed | |
SERIAL PORT 2 CONFIGURATION | ||
| COM/Address | JP2 | |
| » | COM2/2F8h | pins 7 & 8, 11 & 12 closed |
COM4/2E8h | pins 8 & 9, 10 & 11 closed | |
Disabled | pins 8 & 9, 11 & 12 closed | |
PARALLEL PORT CONFIGURATION | ||
LPT/Address/IRQ | JP2 | |
| » | LPT1/378h/IRQ7 | pins 13 & 14, 17 & 18, 23 & 24 closed |
LPT2/278h/IRQ5 | pins 14 & 15, 16 & 17, 22 & 23 closed | |
LPT3/3BCh/IRQ7 | pins 13 & 14, 16 & 17, 23 & 24 closed | |
Disabled | pins 14 & 15, 17 & 18 closed | |
HARD DRIVE SPEED | ||
Speed | JP6 | |
| » | Speed 1 | pins 2 & 3, 4 & 5 closed |
Speed 0 | pins 1 & 2, 4 & 5 closed | |
Speed 2 | pins 2 & 3, 5 & 6 closed | |
EXTERNAL BIOS | ||
Address | JP5 | |
| » | D8000h | pins 5 & 6, 7 & 8, 9 & 10 closed |
DE000h | pins 9 & 10 closed | |
DC000h | pins 7 & 8, 9 & 10 closed | |
DA000h | pins 5 & 6, 9 & 10 closed | |
D8000h | pins 5 & 6, 7 & 8, 9 & 10 closed | |
D6000h | pins 3 & 4, 9 & 10 closed | |
D4000h | pins 3 & 4, 7 & 8, 9 & 10 closed | |
D2000h | pins 3 & 4, 5 & 6, 9 & 10 closed | |
D0000h | pins 3 & 4, 5 & 6, 7 & 8, 9 & 10 closed | |
CE000h | pins 1 & 2, 9 & 10 closed | |
CC000h | pins 1 & 2, 7 & 8. 9 & 10 closed | |
CA000h | pins 1 & 2, 5 & 6, 9 & 10 closed | |
C8000h | pins 1 & 2, 5 & 6, 7 & 8, 9 & 10 closed | |
Disabled | all pins open | |
Note:JP5 should be left in the default setting unless an address conflict exists. | ||
My Books
