DSS-GSH/XS Hard Disk/Floppy Controller Settings and Configuration

Data Bus	16-bit ISA
Card Size	Half-height, half-length card
Hard Drives supported	Two ATAPI/IDE (AT) drives
Floppy drives supported	None

CONNECTIONS
Function	Location	Function	Location
40-pin IDE(AT) interface connector	J1	Right channel audio out	P1
CD-ROM audio in	J2	Left channel audio out	P2
4-pin drive active LED	LD
Note: J1 also supports ATAPI IDE CD-ROM drives.

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Hard drive IRQ15 select	JP1	Pins 2 & 3 closed
	Hard drive IRQ14 select	JP1	Pins 1 & 2 closed
»	Hard drive secondary IRQ11 select	JP2	Pins 2 & 3 closed
	Hard drive secondary IRQ12 select	JP2	Pins 1 & 2 closed
»	IDE(AT) interface secondary address is 170h-177h	JP5	Pins 2 & 3 closed
	IDE(AT) interface primary address is 1F0h-1F7h	JP5	Pins 1 & 2 closed