DTC2277 (ATRONICS VER.) Hard Disk/Floppy Controller Settings and Configuration

Chipset	Atronics ATI-2020
Maximum Onboard Memory	Unidentified
Data Bus	32-bit VESA local bus
Card Size	Full height, full length
Hard Drives Supported	Four IDE-AT devices
Floppy Drives Supported	Unidentified

CONNECTIONS
Function	Label	Function	Label
40-pin primary IDE(AT) connector	PORT1	34-pin cable connector - floppy drive	PORT3
40-pin secondary IDE(AT) connector	PORT2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP2/D	Open
»	Factory configured - do not alter	JP2/E	Closed
»	Factory configured - do not alter	JP2/F	Closed

BIOS ADDRESS SELECTION
Setting		JP2/A	JP2/B	JP2/C
	C8000h	On	Off	Off
	CC000h	Off	On	Off
	D0000h	On	On	Off
	D4000h	Off	Off	On
	D8000h	On	Off	On
»	DC000h	On	On	On
	Disabled	Off	Off	Off

DRAM CONFIGURATION

The configuration of the memory is unidentified.