HBA-CMS2 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	8-bit ISA
Size:	Half-length, full-height card
Hard drive supported:	Two MFM ST506/412 drives, up to seven SCSI devices
Floppy drives supported:	None

CONNECTIONS
Function	Location
50-pin SCSI connector	J2
34-pin edge connector - floppy drive	J3
34-pin control cable connector - floppy drive	J5
External power connector	J6
Drive active LED connector	J7

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	OWS signal disabled	JP2	open
	OWS signal enabled	JP2	closed
»	IRQ3 enabled	JP3	pins 1 & 2 closed
	IRQ5 enabled	JP3	pins 2 & 3 closed
	Interrupt disabled	JP3	open
»	360KB/720KB/1.2MB/1.44MB floppy drives supported	JP5	pins 2 & 3 closed
	360KB/720KB floppy drives supported	JP5	pins 1 & 2 closed
»	AT register emulation enabled	JP6	pins 2 & 3 closed
	AT register emulation disabled	JP6	pins 1 & 2 closed

BASE MEMORY ADDRESS SELECT
Address		JP1/A	JP1/B
»	C8000h	open	open
	CC000h	open	closed
	DC000h	closed	closed
	Invalid	closed	open