IDE-PCI-2 (ASIC VERSION) Hard Disk/Floppy Controller Settings and Configuration

Data bus:	32-bit PCI
Size:	Half-length, full-height card
Hard drive supported:	Four IDE(XT) drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
40-pin primary IDE(AT) connector	CN1
40-pin secondary IDE(AT) connector	CN2
2-pin connector - drive active LED (primary IDE)	CN3
2-pin connector - drive active LED (secondary IDE)	CN4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Primary IDE(AT) interface enabled	JP3/pins 1 & 2	closed
	Primary IDE(AT) interface disabled	JP3/pins 2 & 3	closed
»	Secondary IDE(AT) interface enabled	JP4/pins 1 & 2	closed
	Secondary IDE(AT) interface disabled	JP4/pins 2 & 3	closed
	CPU clock speed <=33MHz	JP6/pins 1 & 2	closed
	CPU clock speed >33MHz	JP6/pins 2 & 3	closed

PCI INTERRUPT SELECTION FOR PRIMARY IDE, IRQ 14
INT	JP1/ 1	JP1/2	JP1/ 3	JP1/ 4
A	closed	open	open	open
B	open	closed	open	open
C	open	open	closed	open
D	open	open	open	closed

PCI INTERRUPT SELECTION FOR SECONDARY IDE, IRQ 15
INT	JP2/ 1	JP2/2	JP2/ 3	JP2/ 4
A	closed	open	open	open
B	open	closed	open	open
C	open	open	closed	open
D	open	open	open	closed

TIMING MODE SELECTION
Mode	JP7	JP8
0 (600ns. normal speed device)	pins 1 & 2 closed	pins 1 & 2 closed
1 (383ns. fast speed device)	pins 1 & 2 closed	pins 2 & 3 closed
2 (240ns. turbo speed device)	pins 2 & 3 closed	pins 1 & 2 closed