BT-742A Hard Disk/Floppy Controller Settings and Configuration
BUSLOGIC, INC.
BT-742A
Data bus: 32 bit, EISA
Size: Three-quarter length, full-height card
Hard drives supported: Up to seven SCSI devices
Floppy drives supported: Two 360KB, 720KB, 1.2 MB or 1.44 MB drives
CONNECTIONS | |
Function | Location |
4-pin connector-drive active LED | J1 |
34-pin data cable connector- floppy drive | J2 |
50-pin SCSI connection-internal | J3 |
50-pin SCSI connection-external | J4 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy drive disabled | W8 | open |
Floppy drive enabled | W8 | closed | |
MISCELLANEOUS TECHNICAL NOTES |
All other configurations are done through the firmware |
My Books
